|
#1
|
||||
|
||||
![]()
GM 120 7.2fw
has had the caps relocated to on top of heatsink, and cap board cut off, comes with original fan, can fit fresh wires if desired, front decal removed box and instructions included £100 posted special delivery Tamiya 416WE Great condition, recent overhaul of parts, over past 6 weeks nearly everything has been replaced minus the bottom deck as was waiting until summer to do so. quite a few spares included, some new, some used. x2 BNIP 53989 centre pulleys (2 pairs) x1 BNIP 53500 cross joint driveshaft rebuild kit x1 BNIP 53575 trf damper piston set (4 pcs) x1 BNIP 54071 1C 416 suspension mount x1 BNIP 51341 416 diff nut and screw x2 BNIP 53576 trf damper bladders (4pcs) x1 BNIP 53502 42mm rear alu bones x1 BNIP 53890 swing shaft blades (2pcs) x1 BNIP 54076 416 Wheel axles (2pcs) x1 BNIP 53825 416 outer hinge pin set (4pcs) x1 BNIP 51293 416 4deg castor blocks x2 BNIP 53574 trf damper rod guides (2 full sets) x2 BNIP ------ front spool outdrives 416 (2pcs) x1 BNIP 54078 44mm front steel bones x1 BNIP Xenon 100t 64dp spur x1 pair used front arms x1 pair new rear arms x1 new 4deg left castpor block x1 new steering arm various plastic shock parts. pictures can be found here http://s3.photobucket.com/albums/y96/gazdesigns/TRF416/ (no electronics included, just rolling chassis) as said before, only thing that you would consider replacing would be bottom deck.... everything else is absolutely mint and fresh. offers around £190 + postage special delivery. Serpent 720 '08' with Mega zx12 pro spec engine, bag full of spares, wishbones, hubs, you name it, enough to keep you going for a year at least... Engine has had under 2 gallons and runs like a train, always used after run oil... And very well looked after to a high standard. Will sort pictures today or tomorow. £200 posted Serpent 720 '07' with STS engine, brought as a spare car but never used it myself. Engine has plenty of compression. No spares with this as this was going to be the spare car! £100 Or both gas cars together for £250 + postage Tamiya M05 pro kit, fitted with Suzuki swift shell, (med wheel base) very well looked after, comes with TT01 friction dampers as oils weren't allowed in local series, no spares as I never broke anything.. Fitted with short KO servo, MRT MX pro esc, HPI Saturn 20t motor. No batteries or RX included. ****** SOLD ****** Yokomo Pro tyre Sander, great condition with box and few sanding drums etc. rrp is still $100+ for this £35 posted Much More CTX -D2 great condition with box £30 posted got more items to add which I'll post as and when I get a chance. pm me here or email. [email protected] thanks for looking |
Thread Tools | |
Display Modes | |
|
|