speed pasion 1.1 help

[racingdwarf]

Hi all

I have just put an old speed passion v1.1 in my b4 with an 8.5 just to try brushless in 2wd before I think about spending an arm and a leg.
Needless to say it has no instructions with it, I do have the black box to set it up but I am having trouble setting it to recognise the full throtel, nutral, brake points of my transmitter.
I have everything set to 0 on transmitter apart from high point that is set to max (150)

When I first put it in and turned on it all worked but I had to apply a fist full of trim to bring the esc to nutral, then all worked but no brake so I thought no probs ,had a look on the speed passion web site and the only instructions are for the latest esc's so I read them thinking that the set button would work the same way....hmmm silly me now have brake at full throtel and full power at nutral tried reversing on the transmitter no better , thus now in a right muddle. bit of help would be spot on, or the trusty GTX goes back in

[racingdwarf]

No probs, sorted now brake High point set to 0

[Ema]

This is your lucky day !!!

http://www.rctech.net/forum/6837235-post1706.html

Bye
Ema