|
#1
|
|||
|
|||
![]()
Looking at buying a new lipo for my cat, have been looking at getting one of these http://www.jespares.com/electric-mod...tegory_id=1168
anyone using one of these or no if it will fit in the car? Or can anyone recomend a decent lipo. Running std catsx carbon chassis cheers |
#2
|
||||
|
||||
![]()
I went through the same trouble. Is your chassis lipo friendly with the industie standard battery lugs. If it doesn't have the square cut outs for the battery you'll have some trouble finding one. I found the trackpower 40c 5000 fit very well, with only a small modification to the top deck to pass the battery wire.
|
#3
|
|||
|
|||
![]()
When you say the trackpower 40c 5000mah do you mean the dark series?
If so im after one that is brca legal, sorry should have mentioned that. i have the lipo lugs that you glue to the underside of the lipo. Is that what you mean? cheers |
#4
|
|||
|
|||
![]()
Reedy 4900
Gm 5000 These all fit fine an dandy |
#5
|
|||
|
|||
![]()
cheers spud dnt suppose you can post a link as were to buy. cheers
|
#6
|
|||
|
|||
![]()
Hi guys my son races the phil booth cat ive glued the locators on our nosram 5300 lipos they fit great no movement but the lipo cases have cracks all over them really bad they look un safe and for a 100 bucks a pack this is not good al 4 packs are the same and they are only 6 months old they get used once a week not sure what the problem is any idears
|
![]() |
Thread Tools | |
Display Modes | |
|
|