One way to reduce slop on the TD ball ends

[Takes2home]

Hi everyone,
like many of you already knows, the DEX410 ball ends have a bit too much of a play (slop), so I came up with this idea:
I use plumber's tape, like the picture shows, I already replaced all the TD ball ends and ball studs with other brands, but I used the tape on the servo ball ends and also as an experiment I drove the car for a couple of days with the stock ball ends with tape underneath, they worked really well. They are quite smooth ( not 100 % ) but definitely no play at all, and at least they lasted until today (since 3 days ago).
If you want to give it a try, hier is a picture.
Let me know what you think about it.
The tape is 0.10mm thick.

[fastinfastout]

I dont understand this ball end issue!

the standard ball ends have normal slop, comparable to to other cars.

anyway, loose ball ends are better than tight ball ends.

[mark christopher]

and the tape will last less than 5 mins!

[Takes2home]

hi Fastinfastout, about the slop I think that the TD ball end as a bit more slop than rpm or losi once,you can read the same thing in a few forum.
the tape doesn t make them too tight it is smoother than it looks and it last longer than Markchristopher think.
I think first try before negative criticism.
anyway i am happy for you that you like the stock ball ends.
have a nice sunday

[mark christopher]

Originally Posted by Takes2home

hi Fastinfastout, about the slop I think that the TD ball end as a bit more slop than rpm or losi once,you can read the same thing in a few forum.
the tape doesn t make them too tight it is smoother than it looks and it last longer than Markchristopher think.
I think first try before negative criticism.
anyway i am happy for you that you like the stock ball ends.
have a nice sunday

its ptfe thread tape, so i know what it is and how it works!