losi bk2 mid

[lodders127]

i have converted my bk2 to a mid and im now wondering how yo change it from a right hand drive to a left hand drive, changing the motor plate to the other side?
chris
sum pics put up now, go to bottom to have a look and tell me what you think.

[Tom3012]

if you go on the atomic carbon website, theres a guide on there

[lodders127]

oh cool
thanks

[Big G]

if it's anything like when I did that to my T3 transmission it was just a case of making a hole in the otherside of the trans casing and sticking the layshaft out of it.

[lodders127]

cant you get another gear that goes next to the spur gear and pinion and if so what are they called? wer could i find one? how much? and would i need to change my geering ?

[dodgydiy]

its just the losi gearbox idler gear mounted to one of the motor screws, think it has to be used with something like a 20 tooth pinion, no gearbox mods needed at all then

[TRX450RACER174]

I am going to make a custom motor plate with the XXX idler so it can be adj for different Spur and pinion combos instead of limited to a 20 pinion and just going up and down on the spur.

[lodders127]

how many tooth is the losi idler gear ? would the b4 gear work ? and do idler gears come with bearings or will i have to buy them aswel ?
if anyone has got a bk2 or cr idler gear then can you send me a pm please with a price and all that
chris

[lodders127]

i will add sum pics of it as peeps are lookin at this post about my car
lol

[lodders127]

here are some pics

http://img697.imageshack.us/i/christmas002.jpg/
http://img4.imageshack.us/i/christmas003.jpg/
http://img515.imageshack.us/i/christmas004.jpg/

[Gonzo]

Another option is fitting an X6 4-gearbox on it, but then you need some alu and dremel-discs

[mopar1994]

or you could just use a whole x-factory rear end one the losi t-plate like i did on my buggy. then you dont have to make the losi rear shock tower fit on the x-factory stuff.

[lodders127]

think i might just put a idler gear on it, alot easyer and cheaper lol
wat doea anyone think about my convetion, any tips on how i could improve it or anythink ?

[lodders127]

have just decided that as he back end is a bit week i was gunna make a new one out of aluminum, i am half way through to building it, will send you some pics when its done

[lodders127]

BUMP

[lodders127]

at the moment the bracket on the back is failing and i have a serious case of cba. i will probably be looking for a proper soon as my big plans for a aluminum one is failing and turning out to be a bit of a disarster. just an update.

[lodders127]

given up on the aluminum bracket. just going to be normal and go with the standard back t bracket and try and find a bolt set for my car as many of my bolts and loose, rounded off or old and look horid.