New diff case ???

[MikePimlott]

Is there any chance of X-factory making a new gear case for the X6 to fit the new gear diffs in from associated ??? please!

[c0sie]

New geared diffs from Associated as in SC10?

[MikePimlott]

Originally Posted by c0sie

New geared diffs from Associated as in SC10?

http://67.199.85.166/ae/b4.1/b4.1_home.php

From the B4.1 and SC10, not sure if the 2 are the same.

[AmiSMB]

I think you will find that as they are designed to be a direct fit for the normal ball diff so there should not be a problem with them going into the X6. I know that some have tried the SC10 diff in a B4 and it went in without a problem. Trouble is that they did prefer the ball diff over the geared diff.

[sparrow.2]

Originally Posted by AmiSMB

I think you will find that as they are designed to be a direct fit for the normal ball diff so there should not be a problem with them going into the X6. I know that some have tried the SC10 diff in a B4 and it went in without a problem. Trouble is that they did prefer the ball diff over the geared diff.

It won't fit as a matter of fact as the bearings are a different size and the diff itself is wider. It will only go into a B4 along with the transmission case from the SC10 and either dremeling the T-plate or using the T-plate from an SC10 as well.

No chance of getting it into an X6 yet!!!

[MikePimlott]

Originally Posted by sparrow.2

No chance of getting it into an X6 yet!!!

heres hoping

[Body Paint]

Besides which the SC10 diff is rubbish!

It is amazingly week and if you put any kind of power through it the diff case flexs and the diff shims squash into the o rings which all adds up to a slipping diff which very quickly becomes knackered.