Trakpower balance lead

[alexb4]

Hi there just got this trakpower balancer of ebay today for my trakpower 4900 so it comes with all the leads needed to charge this but my lipo saddles are the intellect ones with the white plug what adapter do i need to balance charge this ive got the lead with white plug on. Does it plug straight into the side of the trakpower balancer if not what leads do i need and where can i get them thanks Alex

[blue_pinky]

I made up a short link cable for my saddle pack that has a small corally type tube wired in to it to take the balancing plug that comes on that balancer. The small corally plug just needs to connect to the link wire between the cells of the saddle if that makes sense?!!?

I got a small corally type tube off ebay...attached it via a short peice of wire to one end of the link cable...and put some heatshrink/insulation tape around the outside of the tube to insulate it...don't have a pic to hand I'm affraid!

Works a treat

Can't find the seller on my ebay account now, but did find a seller in hong kong selling the small tubes...think they are "2mm tube connectors" or similar as a search on the bay! And it does assume your ok with soldering your own cables up!

[mark christopher]

see if you can find some one with a spare trakpower saddle balance cable, or they sell the conectors, yu can also buy em from maplin, there 2mm connectors.

[markwilliamson2001]

I had same problem. PM Stuey on here for the link to a website with the correct adapter on it. Mine were Vampire Saddles with the same 3 pin balancing lead.

HTH
Mark

[stuey]

Pm sent