|
||
|
 |
|
||||||||||||||||||
|
#1
08-11-2009
|
|||
|
|||
Novak GTB Braking Problem
I've got a Novak GTB running a 10.5 motor and the brakes are totally pathetic, I am running on profile 1. I was wondering if anyone has any ideas on what the problem could be, the power cap maybe?
Many thanks in advance. 
__________________
HoBao HyperStar Pro UK - OS V-Spec Speed // JP-4 // ACE DS1015 // Savox 1258 Team Losi Mini 8ight - Gen's Ace 1800mah Lipo // EZRun 35A ESC 
|
|
#2
08-11-2009
|
||||
|
||||
|
Sintered rotor? Is it old, has it got hot often? Is it a Novak 10.5?
__________________
 Nortech is ACE!
|
|
#3
08-11-2009
|
|||
|
|||
|
Yeah it's a Novak SS 4300 10.5, not a sintered rotor, I bought it used so not sure how old it is and it never gets overly hot.
__________________
HoBao HyperStar Pro UK - OS V-Spec Speed // JP-4 // ACE DS1015 // Savox 1258 Team Losi Mini 8ight - Gen's Ace 1800mah Lipo // EZRun 35A ESC
|
|
#4
08-11-2009
|
|||
|
|||
|
and more basic, have you got it set up to your transmitter correctly? And haven't turned down your end points etc?
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback
|
|
#5
08-11-2009
|
|||
|
|||
|
Yeah the tx is set up correctly with the right end points.
__________________
HoBao HyperStar Pro UK - OS V-Spec Speed // JP-4 // ACE DS1015 // Savox 1258 Team Losi Mini 8ight - Gen's Ace 1800mah Lipo // EZRun 35A ESC
|
|
#6
09-11-2009
|
||||
|
||||
|
Non sintered rotors have crap brakes I'm afraid and are easily effected by getting hot, I'm not sure of the specs on that motor but if it's one you can upgrade to a sintered rotor then that will make it like new again (well actually better than new if it has bonded right now).
__________________
Nortech is ACE!
|
|
#7
12-12-2009
|
|||
|
|||
|
Bought a sintered rotor for it and it now has brakes, the old rotor was knackered. Thanks for the help guys.
__________________
HoBao HyperStar Pro UK - OS V-Spec Speed // JP-4 // ACE DS1015 // Savox 1258 Team Losi Mini 8ight - Gen's Ace 1800mah Lipo // EZRun 35A ESC
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
