|
#1
|
||||
|
||||
![]()
hi, i recently bought a bj4x4 original version. i was just having a think, as i may be swapping shocks from associated to losi on my x6, would this also work on the bj4?? or is it still better with the associated ones??
thanks in advance
__________________
Matt Myers Team Associated b4 Team Associated b44 |
#2
|
||||
|
||||
![]()
most people tend to use the AE shocks as they are fine, plus there are very few setup sheets out there using losi shocks so you would have to do a lot of work on your own to find a good oil piston/spring combination. Im sure the team will have tried a losi shock at some point but they seem to go with an AE shock and why not, they are great if you build them right.
|
#3
|
|||
|
|||
![]()
you can buy the S4 towers from Atomic-Carbon to get S4 suspension geometry with Losi shocks.
|
#4
|
|||
|
|||
![]()
Oi, back to your own forum!!
|
#5
|
|||
|
|||
![]()
thats racin' talk!
![]() I'm just answering a question thats all ![]() |
#6
|
|||
|
|||
![]() Quote:
![]() |
#7
|
||||
|
||||
![]()
But not of the same low drag design, and not in 4mm CF
![]()
__________________
Jonathan | Atomic-Carbon |
#8
|
|||
|
|||
![]()
I can see I'm not going to win this one!!!
|
#9
|
|||
|
|||
![]()
lol !!!
![]() |
#10
|
||||
|
||||
![]()
True
![]()
__________________
Jonathan | Atomic-Carbon |
#11
|
|||
|
|||
![]()
Is there a trick to building associated shocks well, ive built/rebuilt them quite a few times following the manual and they seem fine to me. i guess im just checking im not missing any secret tips which make them even better.
ta |
#12
|
|||
|
|||
![]()
I can't remember the web address but 'elvo' has written something up on his car guide website.
|
#13
|
||||
|
||||
![]()
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#14
|
|||
|
|||
![]()
great article cheers guys!
so what does green slime actually do, is it a sealant? never used it before. And do most racers use it on shocks other than assosiated? ta |
#15
|
||||
|
||||
![]()
its a lubricant not a sealant ...
|
#17
|
|||
|
|||
![]()
ah, good show
better get me some green slime then, may give ghost busters a ring ![]() |
#18
|
||||
|
||||
![]()
i use green slime.
so how much of a difference do these shock towers make?? is it in a good way or does it not make much difference??
__________________
Matt Myers Team Associated b4 Team Associated b44 |
#19
|
|||
|
|||
![]()
It's 2v2 now, grr
![]() Tom tried Losi shocks when he was running a BJ4 but they weren't much different to be honest. I seem to remember he started with XX4 springs/oils and gradually changed them to be the same as how we were running the AE shocks at the time. |
#20
|
||||
|
||||
![]()
There is nothing wrong with the shock bodies if you put the seals in them right.....
Now the rest of the parts..... ![]() G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
![]() |
Thread Tools | |
Display Modes | |
|
|