|
||
|
 |
|
||||||||||||||||||
|
#1
08-11-2009
|
||||
|
||||
cr2 convertion
i have had diff problems so walst the diff has been off i have decided to do a cr2convertion from the tandard chassis
i have cut the rails off and atached the rear end on but it seems all a bit flimsy on the back, is it usualy like that or do i have to put some kind of strut going from the front tower to the back ? 
|
|
#2
08-11-2009
|
||||
|
||||
|
Yes, cutting those rails removes all the strength from that section of chassis.
When I tried that I ended up making an alloy plate for the chassis and this was bolted down via the battery clamps. I then created an X6 style transmission to battery bar brace to try and restore the strength.
|
|
#3
09-11-2009
|
||||
|
||||
|
do you thnk you could send me a pic or something to my pms
|
|
#4
09-11-2009
|
||||
|
||||
|
Check the "I made this" section of the forum:
http://www.oople.com/forums/forumdisplay.php?f=25 It has a bunch of threads with photos on converted mid engined Losi (and others) buggies. Avner.
|
|
#5
09-11-2009
|
||||
|
||||
|
Post 51 on this topic was my car, but there are several others on there too.
http://www.oople.com/forums/showthre...t=24150&page=3
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Team Losi Racing
Linear Mode
