Car keeps cutting out!!!

[GRIFF55]

Hi all!! Bit of help needed please.
I used a 10x2 checkpoint at coventry regionals and my car ran fine(no overheating and temporarily stopping as it did the week b4). Its a trf 501x with too many holes in the body . Raced the car at ledbury this weekend, same gearing etc and it kept stopping 3.5/4 mins into race, then would go again and so on.
I had it geared at 16/96, stormforce 4200 cells, anyone got suggestions, is the speedo limited, undergeared, overgeared, as its starting to me!!!
Thanks all.

[DCM]

what speedo is it?

[GRIFF55]

Its a tamiya volac esc, the same as a ko just reboxed

[DCM]

is the ESC getting warm?

[GRIFF55]

yes, and the motor gets quite hot

[Body Paint]

It would be the speedo that would be my first target.

Maybe the motor but I'd doubt that.

Did it slow down then stop or just stop? How long did it stop for?

[Body Paint]

And what gear ratio does that work out at?

[GRIFF55]

The car just stops, ten or so seconds gets going again and 1/4 to 1/2 lap later stops again and so on.
Ratio at 16/96 is 13.125, also did the same on 17/96 at 12.353?
Help me craig, us welsh should stick together .

[DCM]

undergeared and your ESC is thermally shutting down

[Gayo]

Try with something like a 11.00 ratio.

[Body Paint]

agreed!! Defo speedo thermaling.

should be on 9.5:1 or 10:1 if your feeling a bit girly.

You racing anywhere next weekend? Need somewhere to do some testing.

ANDY, I assume you know who DCM is?

[woOdy]

Originally Posted by GRIFF55

Hi all!! Bit of help needed please.
I used a 10x2 checkpoint at coventry regionals and my car ran fine(no overheating and temporarily stopping as it did the week b4). Its a trf 501x with too many holes in the body . Raced the car at ledbury this weekend, same gearing etc and it kept stopping 3.5/4 mins into race, then would go again and so on.
I had it geared at 16/96, stormforce 4200 cells, anyone got suggestions, is the speedo limited, undergeared, overgeared, as its starting to me!!!
Thanks all.

Hi, I also run a 501X and yes this happens to me only when the motor needs to be skimmed. When i do it is ok untill it needs skimming again. I think its because its getting so hot. Try this and get back to me. Woody.

[Body Paint]

STU: Could you suggest a gear ratio for Andy?

[GRIFF55]

No craig, i'm not racing the weekend, could do with track time!!
THANKS everyone for the help, i'll try your suggestions and let you know the results!!!
Andy

[GRIFF55]

What gearing would you be running on a 9 or 10 double please woody?

[GRIFF55]

Thanks everone for the help!!!! I found the problem out at tiverton on sun, thanks to craig harris who lent me a speedo to try, which cured it.
Bin for my old one now, brushless here we come!!!!!!!
Once again, thanks for the help

[b4rs]

my motor gets really hot and my esc nearly as hot, should it bee so hot that you can just about touch the motor to the point of it being unbearable?

[Body Paint]

If after a five minute race in 2wd your motor is that hot you may be a touch overgeared, but in 4wd that is fairly normal or if you are running your 2wd for longer than 5 minutes or in long grass it probably would also be expexted.

Pleased I could help you out Griff

[DCM]

yeah, glad it is sorted, at least mine and craigs diangostics skills are still ok.

[Body Paint]

And of course my trusty IP6 Mtroniks speedo