|
|||||||||||||||
|
#1
|
||||
|
||||
|
just put my gt2 in my pred and i gives off interfearance like no-1's bizz.
is it caused by the wires being to close or is it the digital servo doing it? ![]() ![]() Help!!!!!
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
|
#2
|
||||
|
||||
|
what radio gear and do you have a pt in there also
__________________
Mattys the driver,my names carl
|
|
#3
|
||||
|
||||
|
i have gemini-2, ko servo & reciever and a mrt pt. gt speedo.
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
|
#4
|
||||
|
||||
|
Maybe a picture of your wiring would help.
Some receivers don't like having PT's close to them. Maybe try installing it on the other side of the car or somewhere a bit further away from the receiver. |
|
#5
|
||||
|
||||
|
i'll get a pic on here in a bit, I will also try to move things around.
cheers for your advice..Alan
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
|
#6
|
||||
|
||||
|
if its a KO receiver and you have your pt any were near it it will go mad, move the pt as fare away from the Rx as you can and your problem should go away, if in doubt unplug it and if the problem stops you no what it was,
__________________
Mattys the driver,my names carl
|
|
#7
|
||||
|
||||
|
hi matt. i've now got the pred sorted. like you were saying about the pt's, certainly dont Work around ko recievers.
soz i didnt get a pic on here, my brat had only lobbed my pc camera in the the toddlers bath tub. ![]() ![]() ![]() CHEERS..Alan
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
|
#8
|
||||
|
||||
|
glad i could help mate,
__________________
Mattys the driver,my names carl
|
|
#9
|
||||
|
||||
|
I ran my pred x-11 today using the speedpassion system in there.
theres only one way i can sum it up really, very "unhappy". when i ran one of these in 2wd i thought they were fab. for me this system in a 4wd is something that i feel needs rethinking as it just could not deliver reliability for me in my pred. heat 1 shut down heat 2 shut down heat 3 had roast esc. boom boom. ![]() ![]() ![]() ![]()
__________________
EAT, SLEEP & RACE. Keeping fast motors reving hard. signed...migsy racing made better by Losi, Team Xtreme, HPI BAJA 5B. novak, castle creations, trak-power lipos bantam B6 and my SMR nicely done by huski sport uk. www.the-pred.co.uk RC BEARINGS 4 U. Club 22 (admin) Losi22, losi xxx cr losi xx-4, losi xxx-4G baja 5b 30.5cc. |
|
#10
|
||||
|
||||
|
Was that 5.5 a bonded or sintered motor, as 5.5 is a little 'warm' for in there, and if you got a bonded, you are driving that much harder,
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|