High Spec Hyper 7, Acoms 2.4, Jp-4 and HPI Temp gun

[ia4ron]

Here we have my high spec Hyper 7 roller. TThis is almost Pro spec the only two things that are missing to make it pro are Rear Cnc Uprights and A Front spider diff. This has been my pride and joy over the last 6 months. I have fitted Hong Nor 13mm BigBore shock but I couldn't find the Standoffs for them so I have used screws and bolts to mount them they work great. but just incase you dont like that I will include the original shocks. I have also removed one of the rear brakes as it was hitting the flywheel when landing jumps and cutting the engine out but again is included Shell is on Ok condition. There are one set of tires included in the sale They are unknown but work well on gravel/sand/snow. (>>NOTE the GRPs that are on the car aren't Included Neither is the Screw Kit!!!!<<)

Upgrade over a standard hyper 7: Milled Chassis, Front and rear Chassis braces, Carbon fibre Radio tray, Carbon fibre centre diff plate, Carbon fibre streering top plate, Cnc streering knuckles, Cnc Front and Rear Shock Towers, Quad Brake discs, Centre CVD's, Front and Rear CVDs, Front and Centre Spider Diffs Cnc Steering Plate, Purple anodised Wing posts and Servo plate posts, Hong Nor 13mm Big Bore Threaded shocks and Dynamite Pro Throttle/Brake Linkage. ( These upgrades cost and absulote fortune.)

£70 Posted.










Next up we have a Jp-4 pipe in working condition. Great pipe add alot of power to the nitro engine EFRA 2062

=SOLD= Posted.




Next up is my Acoms 2.4Ghz System I've never had a problem with it and I have been using Towerpro servos with it. Never had any range issues or anything like that. Fullyboxed and with instructions.

£40 Posted.

Last but not least we have my HPI Temp Gun Works Great.

£17 posted.

Any questions please ask!

I have feedback on Other Model Forums Please ask and I will Link you to those.

Offers welcome!

Cheers, Aaron.