|
|||||||||||||||
|
#1
|
|||
|
|||
|
Hi!
I Have a M.Troniks Viper Tempo11 in my Dark Impact but I have a problem...When I hit full break it won't break and will shut down the ESC for 1 sec. but if I just hit the break a little it will break normally, what's the problem . I have mounted the 8A schottky diode that came with the ESC, what is it doing there anyway?
__________________
AE B4 Factory Team | Yokomo MR4 SSG Drifter | TT ZB2 Mini-B4 | Spectrum |
|
#2
|
||||
|
||||
|
for what my opinion is worth....
i have had two of these esc's and cant say i had the prob. that said i never put the diode on so poss that or maybe it just needs to be reset and the limits redone? worth a try if nowt else as it only takes a min to set the throttle and brake on them. |
|
#3
|
|||
|
|||
|
Okey, I'll try to reset the ESC and take off the diode. Thanks
__________________
AE B4 Factory Team | Yokomo MR4 SSG Drifter | TT ZB2 Mini-B4 | Spectrum |
![]() |
| Thread Tools | |
| Display Modes | |
|
|