Brushless Motor/ESC and Lipo Pack recomendations

[Chris-S]

Looking for recomendations for the above as I've just picked up a T2 009. Going to race 13.5turn as all my local clubs run this class.

I've seen a lot of people recomend the speed passion esc http://www.apexmodels.com/gbu0-prodshow/SPEXT98802LPF.html and motor http://www.apexmodels.com/gbu0-prodshow/SPF135.html
Any others I should be looking at ?

The next question is lipo batteries. A few people have recomended the demo batteries. http://demonpowerproducts.co.uk/product_info.php?cPath=46_142&products_id=4259 and http://demonpowerproducts.co.uk/product_info.php?cPath=46_142&products_id=4470

Do I really need the extra 10C if I'm racing 13.5turn. As I'd ideally like to have two cells, If I have to buy two larger ones so be it.

I've got an LRP charger, but it lacks a balance function. Could use this http://demonpowerproducts.co.uk/product_info.php?products_id=3739 or just buy another charger: http://demonpowerproducts.co.uk/product_info.php?products_id=3800

[Brooks]

The Speed Passion is really good for the money and a great speedo, i have never ran one my self as i run Lrp Sphere Tc Spec Speedo. Great Speedo

The Speedo Passion motors again are good but i use Losi 13.5, only £50.00 pound new, cheap and great motors

For the lipos, 30c will be great for club racing but at high level, you may need that more C rating to give you the edge.
I use Trakpower 3600 30c lipos, great lipos and Gp 4300 35c again great and only £40.00 from Hong Kong.

For the lipo charger, i use the Core UDC - 20, great charger, has never let me down and only £60.00