Go Back   oOple.com Forums > Trade Room > For Sale

 
 
Thread Tools Display Modes
  #1  
Old 08-08-2009
ex-sco77morgan ex-sco77morgan is offline
EX-Member
 
Join Date: Mar 2009
Posts: 625
Default Novak Velocity 4.5r Motor

This motor is a used 4.5 but in very good condition, had very little use as it was replaced with a 5.5 not long after being installed.

£45 posted

Novak's Velociti Racing-Series Brushless Motors is a culmination of several years experience developing and manufacturing sensored brushless motors. Specifically designed for R/C vehicles, each Velociti brushless motor is designed for racing, and is capable of reaching speeds fast enough to satisfy the needs of serious racers, as well as those who just want to go fast. There are five motors in the Velociti series: 3.5-turns, 4.5-turns, 5.5-turns, 6.5-turns, and 7.5-turns.

All Velociti motors are compatible with the Novak GTB Programmable Racing Brushless/Brush ESC, to which the Velociti motor comes factory-wired when purchased as a system. The GTB/Velociti brushless systems include all of the extra performance-enhancing components required for world-class racing, making them ready-to-race straight out of the box (nothing extra to buy or install). Because the Velociti motor was specifically developed for the GTB, and the entire system is factory-tested, racers can be assured that the GTB/Velociti system will provide optimum performance.

Each Velociti brushless motor and GTB/Velociti brushless system has been equipped with Novak's ROAR-approved Nickel-plated Sintered Neodymium rotor1. The high-performance rotor is ideal for use with any and all applications.

Features

• Significantly increased magnetic strength for improved throttle feel
• Improved, stronger motor braking power
• Improved performance in higher temperature conditions
• Improved motor acceleration and power
• Higher efficiency
• Lower current draw
• Nickel-plated rotor for a long lasting, smooth, clean finish
• ROAR approved

Other features include:

All Velociti brushless motors now feature a set of ribbed aluminum end bells. The lightweight aluminum end bells not only reduce the overall weight of the motor, but the ribbed design also acts as a heat sink by efficiently removing excessive heat from the motor.

Other great features found in the Velociti motors include sensor-based technology for excellent starting torque and low-speed driveability; an oversized front bearing for increased load handling and longer bearing life; longer run-times than brushed motors, and ROAR-approved specifications. Additional features include solder tabs, thermal overload protection, various user-replaceable parts, and a virtually maintenance-free design.

picture is not of actual motor
Attached Images
File Type: jpg 3869097281fb41c0936a7c8b679e24dd.jpg (34.3 KB, 7 views)
  #2  
Old 08-08-2009
ex-sco77morgan ex-sco77morgan is offline
EX-Member
 
Join Date: Mar 2009
Posts: 625
Default Novak 4.5 Motor

Price dropped to

£40 posted
  #3  
Old 09-08-2009
ex-sco77morgan ex-sco77morgan is offline
EX-Member
 
Join Date: Mar 2009
Posts: 625
Default

Bump
  #4  
Old 18-08-2009
the incubus the incubus is offline
Member
 
Join Date: Aug 2009
Posts: 1
Default Hello...

Very interested in upgrading to a modified Brushless Motor but I've been out of the sport for over a decade and I traded a High-End Paintball Marker for a complete RC10T B4 setup that is 100% LNIB for my son. The issue is I've recently lost my job and I'm looking for a serious bargain/ Hopefully takes kind to my situation (hopefully you - LOL) so I can pick one up without dipping too greatly into our savings just yet.

I'm looking to spend no more than $55 US so please LMK if that's doable on your end.


Thank you,


ROB.
  #5  
Old 18-08-2009
ex-sco77morgan ex-sco77morgan is offline
EX-Member
 
Join Date: Mar 2009
Posts: 625
Default

$55 posted to the US????
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com