|
#1
|
||||
|
||||
![]()
Anyone else have problems with the esc and motor running waaaay hot? The belts are nice and loose and I don't think I am over geared (18T pinion with stock spur and a 6.5 motor). I boarder line on thermalling every race....any suggestions?
|
#2
|
||||
|
||||
![]()
LRP or novak?
__________________
Nortech is ACE! |
#3
|
||||
|
||||
![]()
On a 5.5 sintered Novak I usually run 17-19/87 so the gearing sounds ok.
I assume you have some ventilation in the shell for the hot air from the speedo escape from? Could try wiring the fan to 7.2v, that seems to help. Not had a problem with mine running hot though.
__________________
Gareth Stanton |
#4
|
||||
|
||||
![]()
LRP Sphere Comp with heatsink
Peak Vantage Brushless motor Lots of ventilation (all stock cut outs plus additional ones over esc and at rear of body) |
#5
|
||||
|
||||
![]()
put a fan in, youd be amazed by the difference of one. try get the lrp specific one which goes on top of the esc it self.
|
![]() |
Thread Tools | |
Display Modes | |
|
|