under tray for zx5

Steve.T · #1 27-02-2007

Having just bought an atomic carbon chassis from james, I now need an undertray.
Can anyone help?

ulrich · #2 27-02-2007

Quote:

Originally Posted by Steve.T

Having just bought an atomic carbon chassis from james, I now need an undertray.
Can anyone help?

Try this
http://www.rc-direct.co.uk/team-azar...tc-p-2404.html

pro4nut · #3 27-02-2007

rc-direct.co.uk do an undertray

they also sell the gomurph shell which unlike the kit one lets a 4.5 brushless fit very nicely

pro4nut · #4 27-02-2007

SNAP

clunk · #5 27-02-2007

yep, ive been running the azarashi stuff 4 a few meetings now,its all good stuff,and loadsa room inside the shell.

paulc · #6 27-02-2007

hi all doe's the azarashi shell fit the standard chassis ok or have you got to use an undertray with it ?

cheers paul

bert digler · #7 27-02-2007

Quote:

Originally Posted by paulc

hi all doe's the azarashi shell fit the standard chassis ok or have you got to use an undertray with it ?

cheers paul

will it fit a works carbon chassis its a bit wide all the way from wapan

clunk · #8 27-02-2007

hi paul,it shud fit the standard chassis well. i run the atomic carbon chassis,and its a touch wide,once velcro'd on tho,i dont have any problems with dirt etc getting in,and gets more cool air to the motor and electrics. hey bert,hows the brushless going?

MATTY · #9 27-02-2007

thats a sore subject for bert !

clunk · #10 28-02-2007

ow dear !!!

pro4nut · #11 28-02-2007

It fits all the chassis types fine, it is actually designed for the KMC conversion.

If you are running a brushless, in the wet or with any standing water either use an undertray or tape up the holes under the motor. If you get any water at all into the sensor wire the motor will be bin fodder.

bert digler · #12 02-03-2007

Quote:

Originally Posted by MATTY

thats a sore subject for bert !

cheera pipe will a bj4 one fit as its the same chassis sort of anyone tried it so i can fit the new wapan shell

bert digler · #13 02-03-2007

Quote:

Originally Posted by pro4nut

It fits all the chassis types fine, it is actually designed for the KMC conversion.

If you are running a brushless, in the wet or with any standing water either use an undertray or tape up the holes under the motor. If you get any water at all into the sensor wire the motor will be bin fodder.

qoute novak they dont like moisture at all good job i bought one but no magic smoke unlkie mats brand new one and his hong kong me no wallanty it

omen1975 · #14 03-03-2007

Quote:

Originally Posted by bert digler

cheera pipe will a bj4 one fit as its the same chassis sort of anyone tried it so i can fit the new wapan shell

Hi Bert,

I have been using a BJ4 undertray on my KMRC ZX-5 for over 6 months now, I do have an azarashi undertray to try when the BJ4 one is past its used by date though. Thin velcro is the best to use, as the thicker velcro seems to bulge out the sides of the shell a little.

Hope this helps
Omen1975

pro4nut · #15 03-03-2007

Quote:

Originally Posted by bert digler

qoute novak they dont like moisture at all good job i bought one but no magic smoke unlkie mats brand new one and his hong kong me no wallanty it

Makes no odds mate, warrenty does not cover water anyway!!

anyone want an lrp brushless motor!! (only slightly broken)

Steve.T · #16 04-03-2007

Thanks for the info guys.
I have now just recieved a new under tray from R.C direct which ,if it is modified a bit, will work on the standard graphite chassis from Atomic carbon

jim76 · #17 04-03-2007

steve
you may want to cut of the sides from the undertray and stick them to the top of the chassis to velcro the shell to.
If you put the whole undertray on with velcro under the chassis you can lose a good 4-5mm of ground clearance.
The beauty of that chassis is it has no holes for water!