|
#1
|
|||
|
|||
![]()
Can someone please advise me on what setup change on the front, the setup sheet is refering to: on below pic, front setup the two dotes behind the wheel what ajustment are they ref to and what will this give you.
![]() |
#2
|
|||
|
|||
![]()
Maybe a shim on upper kingpin,between hub and knuckle,not sure.
I have 2 thin shims(up and down) on mine just to remove slop. |
#3
|
||||
|
||||
![]()
If you mean the high and low dots between the wheel and the hub - its the steering knuckle height. If you have the Champions pack you get alternative kingpins that allow you to set the hub high or low. That is set high.
|
#4
|
|||
|
|||
![]()
thanks for the replys.
so the alloy king pins in the champ pack can be used by leaving the top kingpin on the very top and the lower on the inside if you get me. |
![]() |
Thread Tools | |
Display Modes | |
|
|