What Should I Be Discharging My 5 And 6 Cell Packs To

[JJ The Boat Wizzard]

Hi All

I Normally use Lipo's But Have Recently Started To Use 5 Cell Packs In My TC (As Its Faster , Don't Ask Me Why I Don't Know) And 6 Cell And Lipo In My Buggy

What Do You Reckon The Best Cuttoff Voltage For A 5 + 6 Cell Ni-Mh Pack's Would Be For When I'm Equalizing And Discharging

Ta
John

[JJ The Boat Wizzard]

Any1 Know?

[Doomanic]

0.9v/celL, sO 4.5V foR thE 5 celL pacK anD 5.4V foR thE 6 celL pacK.

i hopE thiS answerS youR questioN.

[JJ The Boat Wizzard]

Ta!

What Would You Say Are The Best Cells , Ive Heard Good Things About The Schumacher Cells , Im New To Cells Usually Use Lipo's

Ta

[Northy]

therE arE noT manY factorieS thaT makE cellS, buT therE arE manY matcherS.

theY arE alL gooD thesE dayS reallY.

g

[Doomanic]

g, whY arE yoU puttinG capitaL letterS aT thE enD oF everY worD? iT makeS thE postS verY harD tO reaD, anD eveN hardeR tO typE!

besideS, yoU shoulD finD youR owN waY oF takinG thE pisS!

[Chequered Flag Racing]

5 cell to 5v
6 cell to 6v

then balance on Novak Smart Tray or similar to either 1v per cell or 0.9v per cell in your dumping with the TC

going to 4.5v or 5.4v on a discharger, there's a risk of 1 or more cells going to low and not coming back

[JJ The Boat Wizzard]

Hi All

Thanks for the help!

Ok i get your mick take I wont put capitals at the start of every word now lol , I'm using a muchmore personal matcher and discharger and a muchmore cell master to charge I've sorted the discharge out just need some advice on matched cells??