Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 30-05-2009
TonyM TonyM is offline
Senior Member
 
Join Date: May 2009
Location: Southport
Posts: 618
Default BC6 and TrakPower Lip problem

Help please - I just bought a BC6 and 4900 Trakpower Lipo's. Unfortunately the BC6 to Trakpower balancing cable is out of stock so I can't balance at the moment.

So I decided to charge without balancing. I set the BC6 to Lip correctly 2s 7.4V etc but when I press START to charge I get an error message (Battery Vol Err Cell Connect) which says I have bad leads. I tried charging a NimH pack and this was fine, so the leads must be OK. I then charged the Lipo with my other Prolux charger (on Lipo of course) and this charged the battery without any problem.

So, battery OK, BC6 charging leads OK - anyone had a similar problem? Must I have the balancing cable for the BC6 to charge Lipo's?

Cheers Tony
Reply With Quote
  #2  
Old 30-05-2009
jim76 jim76 is offline
*SuPeRsTaR mEmBeR*
 
Join Date: May 2006
Location: ruislip
Posts: 2,890
Default

did you have a balance connector for another brand of battery connected to the charger?

If you have any balance cable plugged into the charger but not the cells, it won;t charge. Just unplug the balance cable and it should be ok.

Did you choose the basic lipo charge option, or the balance charge option?
__________________
4wd - X4TE
2wd - X2C (Mad Rat passed down to son!)

Ansmann Racing UK


RIP - MicroTech Racing

Trader Feedback
Reply With Quote
  #3  
Old 30-05-2009
TonyM TonyM is offline
Senior Member
 
Join Date: May 2009
Location: Southport
Posts: 618
Default

No balance charge cable connected and basic charge selected.

Cheers Tony
Reply With Quote
  #4  
Old 30-05-2009
mark christopher's Avatar
mark christopher mark christopher is offline
Spends too long on oOple ...
 
Join Date: Jan 2007
Location: haxey, doncaster
Posts: 7,787
Send a message via MSN to mark christopher
Default

only had this if a balance lead is left in the port, have you had the bc6 from new?,
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
Reply With Quote
  #5  
Old 30-05-2009
JCJC's Avatar
JCJC JCJC is offline
Mad Member
 
Join Date: Nov 2005
Location: Oxon
Posts: 1,662
Default

Unless I am misunderstanding you are charging off 12 volts, we found our BC6 would give this error if our 12v car battery was lower volts (>11.? something)
Reply With Quote
  #6  
Old 30-05-2009
JJ The Boat Wizzard's Avatar
JJ The Boat Wizzard JJ The Boat Wizzard is offline
Senior Member
 
Join Date: Jan 2009
Location: Leeds In T' Yorkshire
Posts: 593
Default

My Charger Give This Error , But When I Balanced The Lipo It Worked Fine Then , dose this about every 10-15charges and then you have to balance the lipo again.
__________________
'John 'The Boat Wizzard' 'The Cart Wizzard' M Walton' Theres a few more but i wont go there!

FG Onroad - Zenoha - Futaba Servo's - GP
Mi 3.5 - Stock class - Orion - LRP - Nosram

TC4 - 10.5 - Orion - Futaba Brushless Servo - LRP
T4 - 6.5 Losi System - Futaba Brushless Servo

DX3r - Ansmann - Muchmore - Propeak

OTHERS ARE ETHER IN BITS OR IN ATTIC
Reply With Quote
  #7  
Old 30-05-2009
TonyM TonyM is offline
Senior Member
 
Join Date: May 2009
Location: Southport
Posts: 618
Default

Many thanks all. It is new, I'm charging from the mains and a balance cable has never been connected.

It sounds like the most possible answer is the one about getting this error message when you need to balance. I guess I will have to wait until I get my balance cable and try then.

Cheers Tony
Reply With Quote
  #8  
Old 30-05-2009
J_WOODY's Avatar
J_WOODY J_WOODY is offline
Senior Member
 
Join Date: Jan 2008
Location: Merseyside
Posts: 344
Default

I've had this problem, but it was when the balance harness was left connected to the charger, i've also got a trakpower pack that the charger refuses to balance no matter what, even though it will balance on other chargers, hope you get it sorted
__________________
#associated #sanwa #muchmoreracing #teamorion
Reply With Quote
  #9  
Old 31-05-2009
TonyM TonyM is offline
Senior Member
 
Join Date: May 2009
Location: Southport
Posts: 618
Default

Thanks James for lending your balance cable at Southport this weekend. It fixed the problem. Obviously the BC6 doesn't like to undertake a basic charge on TrakPower Lipo's. Balance charge fine.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com