Bigwig Parts

[11110111]

BD3 shaft & BG2 shaft's

one of the shafts is for the wheel hub, the other is for the gearbox

BD3 can be seen on the lower part of this page...
http://www.tamiyabase.com/manuals/im.../58057_020.jpg

BG2 can be seen here going through the centre of the diff gear
http://www.tamiyabase.com/manuals/im.../58057_013.jpg

also a sub chassis if anyone has going

let us know I have some parts to exchange, or can do cash, let us know!

[Rich D]

http://cgi.ebay.co.uk/Tamiya-9465157-58057-Bigwig-ORIGINAL-Screw-Bag-D_W0QQitemZ110286765412QQcmdZViewItemQQptZUK_ToysG ames_RadioControlled_JN?hash=item110286765412&_trk sid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A1 2|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

and

http://cgi.ebay.co.uk/Tamiya-58055-B...3%3A1|294%3A50

[11110111]

thanks Rich though don't fancy paying ten's for 1 piece so was hoping someone on here might do one cheaper as a spare or something

sub - chassis i know is a long shot, no harm in trying though is there

[Rich D]

No worries pleased to help. Only trouble is that you are unlikely to find anyone who has what you want to be honest. I have the wheel pin you need as part of this set i bought

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=350102107115

But i dont feel compelled to go to the post office for a quid when i have had to lay out £140 for the screw sets myself thats all Im afraid that restoring old Tamiyas isnt cheap

[11110111]

whoop managed to get some of the parts for cheaper looking at bigfoot and some other rc cars that match annoyingly the same part is often given a different name for different models

still no joy with the sub chassis so if any of u have any suggestions (a link would be awesome, i believe this is a Bigwig specific part....)

Ace of base!



p.s. I am learning how expensive a hobby it is (the hard way) !!

p.p.s still got bigwig spares, including yellow parts that fits over the lexan body (protecting driver figure), most blue parts, some of the black parts.... can sell these seperate or as trade?