|
#1
|
||||
|
||||
![]()
Hi does any one have the information on how to wire in a spektrum module into a ko esprit 2.
Thanks Neil. |
#2
|
|||
|
|||
![]()
Sure you mean esprit 2 ?
Ko changed the module design when the vantage ( successor to the esprit 2) was brought out some years ago. - The modules from the later transmitters still plug into an esprit 2 and vice versa but the electronics are different. I very much doubt that you will find a 2.4ghz module for a transmitter that old. |
#3
|
||||
|
||||
![]()
Hi its a ko propo vantage esprit 2.
The one were the module plugs in the bottom, I want to convert it to 2.4ghz the same as my esprit 3 but need to know how to wire it as there are 6 connections on the module and on my esprit 3 there are only 5 connections. I know it can be done seen other people with there hand sets converted. |
#4
|
|||
|
|||
![]()
I believe helger -the distributors were the people that offered the conversion service. - But it involved sending the transmitter back, and was something that was installed by their technicians.
|
#5
|
||||
|
||||
![]()
I have a pdf with some instructions on how to do this.
I sent mine away to get done by Horizon
__________________
Aidan Burke - Southport Radio Car Club #SchumacherFamily #TQmodels #ExtraLapRCpodcast |
#6
|
||||
|
||||
![]()
The local model shop should be able to send it away for you .. cost I think is approx £50
|
#7
|
||||
|
||||
![]()
__________________
Yellow wheels are faster - FACT |
![]() |
Thread Tools | |
Display Modes | |
|
|