Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 24-03-2009
njc11's Avatar
njc11 njc11 is offline
Mad Member
 
Join Date: Jun 2008
Posts: 1,116
Default Corally Saddle Lipos - Charge advice...

Just got these this morning..



I will be using the Trakpower Balance Charger pluged into a Lipo ready protrak.. but also have the Orion Clubman charger which has the built in balancer.

Im after abit of help on the connection side of things to the charger for balancing.

I have for 2wd the LRP 5300 28c and these are straight forward to connect to the Orion charger, 1 x positve lead & 1 x negative lead then a single wire to balance which plugs into the Orion charger and then the small hole on the lipo.. done..

As you can see on the above i have wires that come of the saddles, im going to change the deans type connector to the corally tubes and prob shorten the wires a tad.. but as you can see i have a small white balancing plug coming of the saddles aswell... this is where i want to know the best thing to do??

Im guessing, you have the red (positive) the black (negative) and the white is the balance wire... whats the best thing to do?? with the Orion Clubman and then the trakpower balancer?? Put the tiny balance connecter from both chargers to the white wire??

Any help would be appreciated.. ( I had a good search but couldnt find anything!)

Cheers

Nick
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com