Set for x6²

[ben44]

Dear,

I'm new on oople and on X6².

I would like to know with base of set up you will use for this





The are some jump but no so hard.

I will find a video if it's better?

I use losi trumper, and in the national comptétion in france we must use the Bowtie.

So what to you think i have to in a start set up?

Thanks a lot

Ben

[usafaircrew]

I tried the Brian Kinwald low bite setup from 2wdrc.com. I thought it worked well on my medium bite track. It also worked well when the traction grew. There is a thread on here about an alternative X-6 setup. Most of those guys are running this setup.

[ben44]

Thanks a lot. But dou you use the associated or losi shocks.

Because in here set he use the associated and i have the losi.

Thanks

[usafaircrew]

I use associated! I do plan on trying the Losi shocks as I have many pairs from past Losi kits.

[Big E]

You could just put the ae pistons in the losi shocks.

[ben44]

I do a test with Ae piston, but for the spring i coud't use the ae.

Do you know the interne radio of the X6²

[CCristo]

You can find a nice spring chart here

The X-6 transmission ratio is the same as the B4. 2.60:1

[Cooper]

Originally Posted by CCristo

You can find a nice spring chart here

The X-6 transmission ratio is the same as the B4. 2.60:1

yep, this is because no matter how much or what kind of idler gears you have, they don't count for the ratio.

[Arn0]

You can get some setup sheet for almost every surface here

And to get some comaprion between shocks, you have this thread with this document

[ben44]

Thanks, I will show.

first test indoor yesturady and the car whas very nice. Thanks Mr factory

I hope to have the good set up for the next race like yesturday