|
||
|
 |
|
||||||||||||||||||
|
#1
10-01-2009
|
|||
|
|||
basic indoor s2 setup required please
just got my new(ish) s2 today and i think it needs a basic setup,im gonna run it tommorow at formby to see if it is okay to start with but i could do with a basic setup to see how far off it is.
its got old losi shocks on it at the moment with silver fronts and red rear springs .
__________________
Mugen mbx6eco.... Mardave Cobra TQ.....IconicRc edition PB Mini Mustang......Been in the shed edition and 65 other pre 1998 iconic rc cars.... Nosram Novak Orion lrp Reedy Turnigy Futaba Schumacher proline ACTIVE SCALE MODELS.CO.UK........better than some other model shop's ive been too... 
|
|
#3
10-01-2009
|
|||
|
|||
|
oh yes! i will be trying my hardest to come in the top 3 of any heat!!!
__________________
Mugen mbx6eco.... Mardave Cobra TQ.....IconicRc edition PB Mini Mustang......Been in the shed edition and 65 other pre 1998 iconic rc cars.... Nosram Novak Orion lrp Reedy Turnigy Futaba Schumacher proline ACTIVE SCALE MODELS.CO.UK........better than some other model shop's ive been too...
|
|
#5
08-02-2009
|
||||
|
||||
|
In case you are still interested: try the basic astro set-up from Elvo (on the Atomic Carbon website). I tried it this weekend on new astroturf during the European Indoor Race and it was fantastic. Only changes I've made were bringing the front shocks to the inner hole on the shocktower, blue spring (front) and ride height of both CVD's and front wishbones just below level.
Tyres were Schumacher Stagger Rib Yellow up front and Schumacher Mini Pin Yellow (medium and hard insert) rear with 1 row of pins cut away.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Atomic Carbon
Linear Mode
