Brushless for Dark Impact

[DRIV3R]

Yo,

Was wonderin if anyone can help me out... I understand how brushless motors work and everythin, but I don't really know what brushless setup to put in my Dark Impact. I would like it to go about 40-45mph but ideally, don't want to spend more than £100 on the entire setup.. Is that askin too much? Can anyone recommend me anything and explain why that would be a gd combo with my buggy?

l8rs

[A.J. Gee]

Go for the mamba max 6900 combo.

[berna1974]

I agree, the Mamba 6900 is the same I tried on my Dark Impact and it works pretty good, BUT you absolutely need to get a slippery kit or you'll crash both differentials!!!

[Spoolio]

Yes, definately get a slipper clutch, or alternatively lots of spare diff bits!!!

[DRIV3R]

Coolio, would I be able to get the ESC, motor and clutch for around £100? Castle Creations sells the combo for like £150...

[josh_smaxx]

The mamba's are very good but you need to remember that there not BRCA legal if you ever wanted to race it, best bashing motor systems out there though.

[rcluke]

Originally Posted by DRIV3R

Coolio, would I be able to get the ESC, motor and clutch for around £100? Castle Creations sells the combo for like £150...

get to www.b-p-p.com

[manos711]

I have a Dark impact 6900 with MM 6900. I used to run it with NiMh 3600 battery but they really suffer to handle the power. So I swaped to Lipo Battery and not heat problems. I use T plugs, sliper clutch and after 10 runs, no heat problems or melting diffs. Remember that changing to Li-po the DI becomes a missile!! 45miles in just 2 secs!!!