Micro shark

[Richard saunders]

any 1 got a shark for sale. i got a blaze do any 1 know where i can get shock rebild kit and what oil to use

and i need help putting the servo in i got the hitec82mg

thank richard

[Body Paint]

what area are you in? oil and seals for the shark or blaze? you can either use servo posts and drill holes in the chassis or you can get a hold down strap made by FTX

[Richard saunders]

im in basingstoke iv just got it this week of ebay its doing my head in i wish i got the lrp shark now

[jim76]

Richard, you can convert it to a shark by adding longer wishbones and driveshafts. But it depends if you already have the alloy shocks, steel diffs etc as to whether it is worth doing this. If you still need to upgrade the diffs and other bits then you may as well go straight for a Shark.

As Craig said, you can drill two holes in the chassis and use normal servo posts, or get the carbon servo plate from LRP/FTX.

Microtech stock most spares for the Blaze or Shark. If they don't have it in stock they can get it pretty quick for you.

[Richard saunders]

iv got the blue alloy shocks and the ball race diffs any good mate

[RCCARRCCAR]

Richard here is a link that can help you out if you do not mind the wait. The Duratrax Vendetta is the same car so all the parts will fit.
www.towerhobbies.com
do a search for vendetta and all the parts will come up

For the servo, you need to either get the servo hold down plate or get mini servo mounts and you will need to drill 2 holes in the chassis.
www.exotekracing.com
look in the products section and scroll down to the mini servo mounts.


Hope this helps.