Unequal Steering lock?

[vrooom]

I was fitting new servo on my tm2. one thing i noticed is the steering are unequal at full lock.

The steering crank hit the post in middle..

is there anything i can fix it?

[Chalkie]

You can dremmel the post to let the cranks move a little more, it only needs perhaps 2mm removing to get full lock, you may also have to take a little material of the cranks, the ball joints on the steering rack touch the cranks where it's kinked just before full lock.

[welshmerlin]

You can increase lock by filling the centre post

[Gavin Collingwood]

Originally Posted by Chalkie

You can dremmel the post to let the cranks move a little more, it only needs perhaps 2mm removing to get full lock, you may also have to take a little material of the cranks, the ball joints on the steering rack touch the cranks where it's kinked just before full lock.

What he said