Mini Inferno ST

[bronco]

I'm selling my Mini Inferno ST due to no 1/18 indoor offroad scene.

Although it was also intended to run indoors, this one was used a few times outside. It shows on the tires (running up and down the street).

Most of the time I spend converting it so I could eliminate the center diff/slipper assembly which Kyosho put in.

I ended up with installing the KMRC center slipper assembly, turned it 180°, swapped the drive shaft front to rear and also swapped the carbon upper deks front to rear. This eliminated the need for saddle packs.

The car is a roller and contains :
- graphite chassis (which has some extra holes drilled into in order to fit everything)
- KMRC slipper assembly with 70T spur gear
- 1 x spare slipper pad
- 2 x spare new ST diff set
- 1 x spare used ST diff set
- 1 x spare KMRC graphite upper plate
- 3Racing alu threaded shock
- Alu heb carriers rear and front (20°)
- Alu shock towers
- spare alu outdrives
- spring set
- spare diff case + diff inside
- 4 x brand new tyres

If interested I also have some parts of the original ST :
- 2 x original center slipper/diff assembly from Kyosho
- 1 x 3Racing Delrin gear set
- 1 x original receiver/esc
- 1 x voltage reulator for 8cells
- 1 x Kyosho saddle pack

Looking for 90£ + postage.

I also have a spare graphite chassis for the Mini Inferno 20£
Cheers

[bronco]

Anyone interested in this car ?

[c0sie]

Not interested in the car, but where do you live?

[bronco]

Hi, I'm from Belgium near Antwerp.

[bronco]

I'm so jealous about all these 1/18 scale off road races in the uk. This is totally non existing in Belgium. Only 1/18 scale touring is available (but limited).

I also have an FTX Blaze with options (motors, esc, sway bars, pbs steering etc.) I'm thinking of selling. Just don't know cause I like the little car.

But since I converted an Ofna crt.5 (1/12 scale) to brushless, the Blaze is just gathering dust...

[c0sie]

Micro racing was unheard of in the UK until 2005. You need to find a group of people who also like racing micros and create your own races!

The only reason I organised big race meetings was cos no one else was going to bother, and I wanted a big race to enter