Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 12-01-2014
Boons's Avatar
Boons Boons is offline
Senior Member
 
Join Date: May 2013
Location: Buckingham
Posts: 406
Default Supastox with Core 45 ESC, how much brake %?

Hi all,

I have a programme card for this and wanted to turn the brakes up a bit as they seem a bit weak for my liking.

Any recommendations?

Cheers
Reply With Quote
  #2  
Old 12-01-2014
SlowOne SlowOne is offline
Mad Member
 
Join Date: Oct 2007
Posts: 1,549
Default

Set the brake at 100%, make sure your TX is also set to 100% and then regulate the brake on the stick.

The amount of brake you get will depend on the motor you run, the ratio you run and the speed the car is doing when you haul on the anchors. As the car is heavy and the motor is probably carrying timing, don't expect it to have a lot of brakes.

If you are using brakes in GT12 you will be slow around the lap - they are not required in the pan classes unless you race 12th Modified. HTH
Reply With Quote
  #3  
Old 12-01-2014
lardy37's Avatar
lardy37 lardy37 is offline
Member
 
Join Date: Jan 2012
Location: torbay
Posts: 197
Default

The brakes will never be very good on a sss as only 1s plus as above shouldn't need them as you need to keep it moving if anything just back off, turn and hope for best
__________________
Schumacher kf
Schumacher sv2
Durango Dex210
Carisma gtb x2
Schumacher gt12 x2
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com