Go Back   oOple.com Forums > Car Talk > Team C Racing

Reply
 
Thread Tools Display Modes
  #1  
Old 27-12-2013
Dandare's Avatar
Dandare Dandare is offline
Senior Member
 
Join Date: Dec 2010
Location: Suffolk
Posts: 914
Default TM2 & T4 (x4te) shared parts ?

I have an almost new Ansmann x4te (Team C T4) ready to race but am unlikely to get any use from it. I've been looking at both T4 & TM2 manuals to see which, mainly rear end parts of the T4 fit the TM2 but none of the part No's seem the same. Even parts such as the rear upper suspension mounts which I thought are the same have different part No's.

My question is, are there enough shared parts to warrant me breaking the x4te/T4 for spares for a TM2 ? I guess if the value of the useable spare parts is more than the current value of my 4wd rolling chassis I may as well just break it...

Also, would the x4te ball diff(s), rear/centre CVD's/slipper assembly & carbon rear shock tower also fit the TM2 ? Breaking it would also provide me with a spare set of new big bore shocks, spare sealed bearings etc etc too...

Dan.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R


http://www.norfolkbuggyclub.moonfruit.com/
Reply With Quote
  #2  
Old 27-12-2013
Philim Philim is offline
Member
 
Join Date: Apr 2011
Posts: 191
Default

I have done the same as you. The things of most value have been the driveshafts and cf rear shock tower.
Reply With Quote
  #3  
Old 27-12-2013
Adam F's Avatar
Adam F Adam F is offline
Mad Member
 
Join Date: Sep 2009
Location: Northants
Posts: 1,803
Default

Planning to the same with mine if the TM4 uses the same diffs....
Reply With Quote
  #4  
Old 27-12-2013
Philim Philim is offline
Member
 
Join Date: Apr 2011
Posts: 191
Default

Quote:
Originally Posted by x313 View Post
Planning to the same with mine if the TM4 uses the same diffs....
It doesnt....
Reply With Quote
  #5  
Old 27-12-2013
Smartalec's Avatar
Smartalec Smartalec is offline
oOple Advertiser
 
Join Date: Oct 2006
Posts: 1,508
Default

I'm sure that the ball diffs will fit, and you will be able to use all the rear end of the x4te on the TM2 but only the diffs will be useable on the TM4. The centre shafts will certainly be no use on the TM2 as one is too short and the other too long. Its worth more broken down as spares for TM2 use i'd say ;0)
Reply With Quote
  #6  
Old 27-12-2013
Dandare's Avatar
Dandare Dandare is offline
Senior Member
 
Join Date: Dec 2010
Location: Suffolk
Posts: 914
Default

Quote:
Originally Posted by Smartalec View Post
I'm sure that the ball diffs will fit, and you will be able to use all the rear end of the x4te on the TM2 but only the diffs will be useable on the TM4. The centre shafts will certainly be no use on the TM2 as one is too short and the other too long. Its worth more broken down as spares for TM2 use i'd say ;0)
Certainly if the whole rear end is usable, along with the new big bores, diff's etc it would seem viable to break it. I wouldn't think an x4te rolling chassis is gonna be worth much now anyway.

Seemed a shame as it drives really well but I just can't see when it'll get used anytime soon.

Cheers Alec.
__________________
TLR 22 3.0/3300kv brushless Lunchbox/Helion 2wd sct/Dromida MT4.18/Orlandoo F-150/Mardave Cobra/Re-re Cat xls w/uprated tranny/Re-re Top Force/Carisma GT24R


http://www.norfolkbuggyclub.moonfruit.com/
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com