|
#1
|
||||
|
||||
![]()
Apologies if this thread has been done before but I could not see anything. With the B-Max 2 MR kit, what are the piston sizes that are supplied with the kit? Any help would be much appreciated.
Al
__________________
Al |
#2
|
||||
|
||||
![]()
Kit pistons are numbered 1,2 and 3, all 4 hole. I assumed they were corresponding to 1.1mm, 1.2mm and 1.3mm holes, but I just looked at mine and its not the case.
Piston no.1 seems to have 1.4mm holes Piston no.3 seems to have 1.2mm holes Piston no.2 is in my front shocks at the moment, so I can't check. I'd guess 1.3mm? I've used the shafts of my 1.0->1.6mm drills to check, along with my vernier callipers to check the drill bit shaft.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#3
|
||||
|
||||
![]()
Thanks for the info.
__________________
Al |
![]() |
Thread Tools | |
Display Modes | |
|
|