Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 26-08-2013
craig72 craig72 is offline
Member
 
Join Date: Jun 2013
Location: nottingham uk
Posts: 8
Default speed passion esc fan

Hi all i have a speed passion revention pro and 7.5 motor combo the esc comes with a fan can i get away with not fitting this as there just isn't the room in my losi 22 or would you recommend fitting it.
Cheers Craig
Reply With Quote
  #2  
Old 26-08-2013
OneKiwi's Avatar
OneKiwi OneKiwi is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Jun 2010
Location: Sweden but from New Zealand
Posts: 2,033
Default

Depends on what you are running on. High grip will produce more heat than low grip.

If you can mount it with the wires facing the sidepods and have an air vent somewhere close then should be ok.

Or if you mount it above the lipo and have a longish plate there you could have a fan mounted on that so it blows through the esc.

There are also low profile fans you can get that are about 7mm high
__________________
oOple feedback
Ebay feedback

"Babe thats NOT the price its the serial number!!"
Reply With Quote
  #3  
Old 26-08-2013
craig72 craig72 is offline
Member
 
Join Date: Jun 2013
Location: nottingham uk
Posts: 8
Default

thanks for the reply am running mid motor on astro turf ,indoor carpet have made a shelf for the esc over the lipo which i copied from a forum members picture of his losi guessing his esc was smaller when the fans mounted its tight to the top of the shell so might drill small holes in the top to let the air in.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com