|
#1
|
|||
|
|||
![]()
Hi,
Does anybody have a Astro set up for the T4 right down to if you have cut the top decks and swopped shocks from front to back of the tower? |
#2
|
||||
|
||||
![]()
What grip level? that make all the difference and are you using ball or gear diff?
|
#3
|
||||
|
||||
![]()
on my x4te ( same car ) I ran
front and rear top decks cut, geard diffs 7000 front 5000 rear ( with 4 planetry gears ) kit pistons drilled to 1.4 each hole 450 / 500 cst front 350 / 400 cst rear losi blue / black front springs kit rear springs middle hole rear shock tower inner hole on wishbone shocks swaped to front ( mote pivot in corners ) inner hole rear toplink inner hole on 1deg Durango hubs with hobao h2 wheels ( widens rear track ) inner hole front shock tower outer hole on wishbone inner hole on top link 2mm spacer on outer ball joint using 13deg hubs 65gram weight between lipos ( where plastic spacer should be ) remove casing round spur gear to reduce heat alloy chassis depending on track
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#4
|
|||
|
|||
![]()
Hi,
Thanks for the replys it would be high grip and I am on ball diffs |
![]() |
Thread Tools | |
Display Modes | |
|
|