|
#1
|
||||
|
||||
![]()
Hi guys,
Loads of questions! I've been reading loads on this and I think I'm getting the hang of it.....ish! I've only just started using NIMH cells and I see there is a bit of contrasting information on the interweb! So, I race every Friday night and last Friday I finished the night with a pack that was used in my final, and I have put it back in the box, and I have another fully charged pack that I put back in the box. I have a UAC50 charger that I can discharge then charge or visa versa I think. How should I set this particular charger to do that? I don't have an equaliser, should I? And it looks like the equalisers work with side by side cells, not end to end? Also I have read that the cells should cool right down before charging but due to the short time between heats at my club, and only running 2 packs, that doesn't seem possible - even after I marshalled the next race the cells were still pretty warm. All advise welcome! Thank you! |
#2
|
||||
|
||||
![]()
__________________
|
#3
|
||||
|
||||
![]() Quote:
I wish! NIMH only allowed at the club. |
#4
|
||||
|
||||
![]()
That is exactly what prevents me from racing mardave!
__________________
|
#5
|
|||
|
|||
![]()
I raced a mardave the last 5 years mate, got nimh down to an art again, makes all the difference with power.
Drop me a pm as im working just now and I'll forget. |
#6
|
||||
|
||||
![]()
That is exactly what prevents me from racing mardave!
__________________
|
![]() |
Thread Tools | |
Display Modes | |
|
|