SOLD Kyosho Rudebits DB1 - lots of pics now added!

[paulj]

Kyosho Rudebits DB1 fully loaded roller (without electrics).
Car was built with a new RB5 SP2 WC and a new FS2 (FS2 SP Spec)
Used for 5 meetings / total runtime +/- 150min.
As expected the car has the usual marks on the chassis/arms.
Except for the marks on the chassis the car is in very good condition.
No wear on the drivetrain, diff, oudrives, etc...

Car built with Kevin Lee base set up.

Fresh diff rebuild with new gears, pressure plates, Rudebits ceramic diff balls, and Exotec alloy diff nut. Plus new kyosho thrust race fitted. Diff run in on bench but otherwise unused.

New fresh slipper pad set red/white

3racing rear alloy camber link plate

3racing Aluminium gearbox bearing holder

Blue aluminium Kyosho 0° rear hubs

1 new pro painted Jon Miller shell

1 used pro painted Jon Miller shell.

Includes brass under LiPo weight kit and brass spine weight.

new Rudebits undertray plus cut down Rudebits undertray for use as side guards

I will include a new Rudebits R1 wing as the LMR wing fitted has lost some paint but is otherwise fine.

It will also include some spares, rear optional dark yellow springs, front shock tower, new rear DMS carbon tower, suspension inserts, spur gear, wishbones, front bulkhead, shock plastic parts set, etc, plus whatever other bits are floating around for the car. See pics below for most of included spares. I will include setup sheets and can email the new owner the full parts listing, build tips, and other information.

SOLD!

Thanks for looking