|
||
|
 |
|
||||||||||||||||||
|
#1
28-04-2013
|
||||
|
||||
Reedy motors
Im contimplating a change in motors but dont like the current solder tabs as i tend to damage them. i prefer the easy solder tabs that were on Losi motors and now are on the Reedy and Venom motors.
Anyone know what differences the Reedy brushless motors have compared to the LRP X20?
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS 
|
|
#2
29-04-2013
|
|||
|
|||
|
Good question that!
I ran then both back to backing there both ace! Reedy is much smoother with power delivery Lrp is much more punchier and harder to drive in low grip conditions Much more rpm on Lrp wants to light the tyres up more etc Top end wise I think the Lrp is quicker if you compare wind for wind If you run a 5.5t x20 you will need a 5.0t reedy If you run a 6.5t x20 you will need a 5.5t-6.0t reedy Solder tabs are easier to use on reedy yes but make sure you have a good soldering iron else they won't stick as easy as the lrps do The reedys run much cooler Does that help!?
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
