Set of rear alloy suspension blocks (hinge pin holder blocks) to fit the Cat K1.
The rear blocks have been (professionally) drilled out to M4 so they only fit the K1 (not the cat SX series).
Great mod as they allow adjustment of the rear toe & anti squat as well as allowing the Simon Moss 'high/low' set up. And they won't break either
The M3 screws & spacers are included but not the M4 ones - ideal if you have the front blocks already as they come with assorted spacers. If not, these parts can be very easily sourced (2 no. M4 x 20 screws + M4 ~3mm spacers).
£10 Posted