Go Back   oOple.com Forums > General > 1/10th OFF ROAD

Reply
 
Thread Tools Display Modes
  #1  
Old 01-04-2013
extrememacko extrememacko is offline
Member
 
Join Date: Jun 2012
Posts: 55
Default LOSI XXX DIFF OUTDRIVES, HELP!!

Ok so I bought a pair of diff outdrives for xxxcr, apparently, but the bearing shoulder was very long so the gearbox case can not close...

... So I buy another pair, the correct ones?.. No! This time bearing shoulder correct length but no D-shape to fit diff rings, just rounded!!!!

How many XXX outdrives are there, Gen1 Gen2 Gen-wrong whats going on????!!!!!!

Which ones do I need???

C'mon Losi experts
Reply With Quote
  #2  
Old 01-04-2013
Frecklychimp's Avatar
Frecklychimp Frecklychimp is offline
Mad Member
 
Join Date: Jun 2010
Location: East Midlands
Posts: 1,054
Default

There are a fair few variants across XXX range,

Are you 100% you own a CR?

the D shape fitting is for older XXX models, CR uses circular drive rings with copper heat soak washers

did you get a manual with it?

is the gearbox black or grey? what type driveshafts do you have?
__________________
Mr F.Chimp
Reply With Quote
  #3  
Old 01-04-2013
extrememacko extrememacko is offline
Member
 
Join Date: Jun 2012
Posts: 55
Default

Its a black gearbox, this may be older type as no copper in sight! Manual long gone.
Reply With Quote
  #4  
Old 01-04-2013
super__dan's Avatar
super__dan super__dan is offline
#1 ZX5 fan
 
Join Date: Feb 2006
Posts: 3,482
Default

BK2 had different outdrives too I think
__________________


Nortech is ACE!
Reply With Quote
  #5  
Old 01-04-2013
Frecklychimp's Avatar
Frecklychimp Frecklychimp is offline
Mad Member
 
Join Date: Jun 2010
Location: East Midlands
Posts: 1,054
Default

If it hasn't got round diff rings i doubt you have a XXX CR, so buying parts for a CR will cause compatibility issues.

If you have the white 2.43:1 diff gear then you should be able to just buy a set of XXX CR drive rings (LOSA3039) and use the 'wrong' outdrives you have already bought as the gear is the same in gen1 and gen 3 gearboxes

other than that you need a pair of LOSA3073 outdrives, you should already have the aluminum tube insert that converts one from female to male.

D shape diff drive rings are LOSA3070

avoid anything other than part numbers i've listed above as they will be for other models/variants. Gen 2 is for the XXX BK2 which has a grey gear case and 2.56:1 internal ratio so has different diff parts/outdrives
__________________
Mr F.Chimp
Reply With Quote
  #6  
Old 01-04-2013
extrememacko extrememacko is offline
Member
 
Join Date: Jun 2012
Posts: 55
Default

awesome advice, thank you
Reply With Quote
  #7  
Old 01-04-2013
Frecklychimp's Avatar
Frecklychimp Frecklychimp is offline
Mad Member
 
Join Date: Jun 2010
Location: East Midlands
Posts: 1,054
Default

You are welcome matey,

If you need any r/c related advice then you are definitely in the right place.

There is a Losi/TLR specific section on oOple where you will find a wealth of knowledge although XXX stuff will be well buried so the forum search function may be easier.

If you need an instruction manual then they are available online on Losi.com in support section and you can download exploded diagrams etc to help with finding part numbers.
__________________
Mr F.Chimp
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com