|
#1
|
|||
|
|||
![]()
Does anyone have a list of the 2.2 wheels that will fit the rc10 black tubs direct with no mods?
94 Worlds, B2 sport wheels etc? Many thanks |
#2
|
||||
|
||||
![]()
JC Racing make specific RC10 wheels with the correct offset.
Everyone running old RC10's on here uses them.
__________________
Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available) |
#3
|
||||
|
||||
![]()
AS Si says, if you want an easy direct fit go for the JC Racing Products 5 spoke wheels.
You can get away with B2 and B3 wheels but you will have to part drill out the holes in the wheels to fit them on the bigger RC10 axles. The only way they will be a direct fit is if you replace the axles and bearings with B2 ones. If you want to use hex drive wheels there is the HPI Adapter Set that is designed to fit on the RC10, then you can use older wide offset hex drive wheels.
__________________
Visit my showroom |
#4
|
|||
|
|||
![]()
Thanks guys, will check out the JC Racing wheels.
|
#5
|
||||
|
||||
![]()
Yup JC wheels are really your only option if you direct fit wheels that are readily available.
I run B2/B3 CVDs & wheels but even those wheels are not that easy to come by now (although I believe there is an avaliable alternative from the Thunder Tiger RTR B3 clone?) I do actually have a pair of B2/B3 sport wheels which have the part-tapered holes & are a direct fit onto the older ali tubbed cars ![]() |
#6
|
|||
|
|||
![]()
Cheers Dan. Have a set of JCs in each colour coming, their's is a good price for set of 4 i think. Hopefully sorted a Team Car as a base, and a load of Associated, Rpm and Andys parts on way from Usa for a sort of late black tub upgraded, possibly brushless, vintage runner project.
|
![]() |
Thread Tools | |
Display Modes | |
|
|