Diff Dullard

[Dudders]

Hi guys

Finally doing some maintenance!

Taken the diff out to re do it, problem is re assembly!

Looking rear to the front, adjuster on the left or right hand side??

Dawg!

[clint]

rear diff the screw head will be on the left side, on the right side in the front..if this is what you are asking??

[andoiwebb]

Errrrrr, are you sure?!!!! Download the instructions from kyosho to be sure!! If the above post is correct, I've been putting in the wrong way around for a year!

[Rebelrc]

Dudders ,what car?
I think Clint is talking x11
If you are talking RB5 vega
Diff adjustment hole left
Hth's

[rc_penguin]

Don't think it really matters, but I always put the diff in so the screw head is on the opposite side to the spur.

[Dudders]

Originally Posted by Rebelrc

Dudders ,what car?
I think Clint is talking x11
If you are talking RB5 vega
Diff adjustment hole left
Hth's

RB5 Vega. So screw head on the left hand side, ala same as spur?

[Getpip]

The RB5 manual is on the net you lazy git!
According to said manual (section 13) ...
Screw head should be on the grooved output side which should be on the left.

[RudeTony]

Originally Posted by rc_penguin

Don't think it really matters, but I always put the diff in so the screw head is on the opposite side to the spur.

Correct