firmware for inix 120a esc where to download it?

[ch!3f]

as title ive bought an inix esc and want the firmware download to update the esc.

if anyone has the link or already downloaded it and able to forward it on id appreciate it.

thanks ian

[D20MCK]

It's just a Hobbywings esc so could use Hobbywing or Speed Passion to update it

http://www.hobbywing.com/upload/soft...tup_120808.rar

http://www.speedpassion.net/files/SP..._v1_1_0_18.zip

[ch!3f]

nice 1 thanks i wasnt sure so wanted to make sure i got the right 1.

are the links the same too for connecting the esc to laptop do you know?

[D20MCK]

I would use the Hobbywing software. You need have the lcd program box to update the speedo, when you have it all pluged in you can choose what version of software you want to run in the Hobbywing program. It's really easy.

[ch!3f]

ill get a box ordered then thanks for the help

[Aran]

You should be able to use hobby wings v3.0 firmware, I can on my hobbywing rebadged esc.

Look for a USB adapter on eBay or a hk based website, only cost me £5 and it works! Give you the link but I can't find it :/

[D20MCK]

http://www.ebay.co.uk/itm/HOBBYWING-...#ht_4794wt_952

Get one like this so you don't need to get your laptop out every time you want to change a setting if you are trackside. You get a USB adapter/link but you need a laptop pc with you, I would go with the LCD box much faster and easier to change a setting.

[ch!3f]

cheers im going to order 1 of the boxes id prefer to do it that way it was just how they said it on the description of the item you need the usb link to do it no mention of a program box for it.

[OneKiwi]

Are the esc any good? Or are they a bullistorm esc in disguise?

[ch!3f]

not sure yet only used it in my v10 so i wont know till i try it in a tc.i ran it on a 13.5t motor and couldnt get 3/4 throttle with it and had to drop to a 17t pinion with 76t spur was silly quick as the timing was turned right up and didnt know how to alter it till the following day

[Aran]

The one I have is similar to the Bullistorm but in black . been working flawlessly!

[wreckers]

ch!ef hows it going your end?
fresh out of box an esc not readable with my 2n1 box nor does the ezrun standard card work.
So standard inix card for now till inix usb link arrives so can alter turbo timing etc.

[ch!3f]

alright bud, like i said on the other forum its bang on for the price and on par with the more expensive esc's.

dont you have to upgrade the esc 1st to the latest firmware before it will work with the lcd program box?

[wreckers]

when usb link arrives shall see

[wreckers]

link arrived, still same story esc not accepting hobbywing filmware but the link does. I've given tech support an email see what they say if get a reply

[ch!3f]

where did you get the link from ebay?

[wreckers]

It was, but wasn't needed if my esc was current spec, managed to catch up with mate finally who has current system an esc has red sink with ampage stamped on it an using v2 hw program card plugged in my lcd box all is well shame bout mine