SOLD Xray T3 2012 + massive spare package

[fastfilli]

For sale due to going buggy racing!

My lovely Xray T3 2012

Not much use, it’s in mint condition I brought this at the start of Kettering model car clubs last 8 week championship.

I won the championship and have not used much since.
It has never been used outside, so the chassis is mint.
The car is showing little or no signs of wear its all still feeling tight.
I have never even rebuilt the car, as it has never warranted it.
I have never even broken any parts on this car, its all original as it was first built using a proper Hudy setup station.
The chassis has no tweak, lovely and flat!
Set up is as per book for indoor with Tamiya TRF 3 hole pistons 550cst rear oil 600cst front oil and Xray option alloy spring cup holders on the shocks.
The car was awesome right out the box setting FTD first run
Defiantly the best touring car I have ever owned.
The body shell does show signs of use but will be fine until you spray your own colours.
Now for the massive spares package listed below all new in packet unless stated;


30 5432 = £12.99 high performance Kevlar drive belt front 3 x 513 mm
30 5240 = £4.99 composite drive shaft replacement cap 3mm (4)
30 2033 = £4.99 alu nut for suspension holder (2)
30 5231 = £5.99 drive shaft coupling
30 3163 = £5.99 rear susp. Arm - hard
30 2161 = £4.99 front suspension arm – hard
30 5392 = £4.99 drive shaft pin 2 x 10 with flat spot (2)
30 3035 = £11.99 alu quick roll center holder
30 2363 = £5.99 composite c-hub – 2 deg – medium
30 2364 = £5.99 composite c-hub left medium – 4 deg
30 2364 = £5.99 composite c-hub left medium - 4 deg
30 3352 = £5.99 composite upright 0 outboard toe in – medium
30 3352 = £5.99 composite upright 0 outboard toe-in – medium
30 3352 = £5.99 composite upright 0 outboard toe-in – medium
30 3352 = £5.99 composite upright 0 outboard toe-in – medium
30 5431 = £12.99 high performance Kevlar drive belt front 3x5
30 3163 = £5.99 rear susp arm hard 1 hole – v2
30 2364 = £5.99 composite c-hub v2 left – medium 4 deg
30 2069 = £4.99 t3 composite layshaft bearing support shim
30 2252 = £5.99 composite steering block – med – v2
30 2252 = £5.99 composite steering block – med – v2
30 5778 = £4.99 offset spur gear 78T / 48 pitch
30 5787 = £4.99 spur gear 87T / 48 pitch
30 5781 = £4.99 offset spur gear 81T / 48 pitch
98 0210 = £3.99 pin 2x9.8 (10)
30 3163 = £5.99 rear susp arm hard 1 hole
30 2252 = £5.99 composite steering block – med – v2
30 5135 = £9.99 composite solid axle driveshaft adapter (2)
30 5135 = £9.99 composite solid axle driveshaft adaptor (2)
30 5576 = £4.99 t2 008 fixed pulley 16t (2)
30 5340 = £10.99 drive axle – hudy spring steel
30 7215 = £5.99 front suspension pivot pin (2)
30 5231 = £4.99 drive shaft coupling hudy spring steel
30 5446 = £11.99 high performance Kevlar drive belt rear 3 x 189
30 5391 = £4.99 drive ECS shaft pin 1.5 x 9 with flat spot
30 5135 = £9.99 composite solid axle driveshaft adaptors (2)
30 2163 = £5.99 front arm hard – 1 – hole
30 2252 = £5.99 composite steering block – med – v2
30 7314 = £5.99 rear suspension pivot pin (2)
30 5392 = £4.99 drive shaft pin 2 x 10 with flat spot (2)
30 8035 = £4.99 composite piston adjustable + non adjust. (set2+6)
30 5240 = £4.99 composite drive shaft replacement cap 3mm (4)
30 2363 = £5.99 composite c-hub right -4 – deg – medium
30 6184 = £7.99 long composite lipo battery backstop (1+1)
30 5391 £4.99 ecs drive shaft pin 1.5 x 9 with flat spot (2)
30 4990 = £ gear diff gasket (3)
971240 = £ silicone O-ring 24x0.7 (9)
ALSO IN CLUDED BUT NOT IN PACKET: ( unused!)
Front bumper foam
2 x extra hard front arms
2 x extra hard rear arms
Another bag full of shock pistons
4 x shock diaframs
Full set of suspension arm holders
Plastic shock spring cup holders
Front belt

£310 delivered
£300 collection