|
||
|
 |
|
||||||||||||||||||
|
#1
26-05-2008
|
||||
|
||||
printer probs
having problems with my hp photosmart d7100, it wont accept a new cartridge saying ( the following ink cartridge cannot be used after device intialization and must be replaced ) its a new cartridge so i aint happy
 , any ideas anyone on how i could maybe reset the printer ?
__________________
 
|
|
#2
26-05-2008
|
||||
|
||||
|
Is it a compatible cartridge or a proper HP cartridge ?
__________________
Stevie Brew [email protected] http://www.oople.com/forums/showthre...hlight=stegger
|
|
#4
26-05-2008
|
||||
|
||||
|
I know with the laserjets at work, you can reset them by holding down the green tick button when you switch it on and do a 'cold' reset. I am not sure if you can do anything else like this. Otherwise take it back to the shop with the receipt and get a new one. It could be a faulty cartridge....
I took a dodgy light bulb back as it only lasted a day before going pop. They gave me a new one straight away.
__________________
:: AE B5MCE - SP 7.5 v3.0 Brushless Motor - Reedy Shorty Lipo - Savox Servo - Spektrum Rx :: :: Paint By Turnip Paint ::
|
|
#5
26-05-2008
|
||||
|
||||
|
Have you found the trouble shooter on the HP website ? If you haven't try this.....
http://h20000.www2.hp.com/bizsupport...riesId=1156664
__________________
Stevie Brew [email protected] http://www.oople.com/forums/showthre...hlight=stegger
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
