|
||
|
 |
|
||||||||||||||||||
|
#1
11-08-2012
|
||||
|
||||
210 kit shock pistons
Ive heard the manual is incorrect and advices you to use the pistons for the front shocks in the rear and vice versa.
According to the manual the front pistons should be 1.3x6mm and the rear 1.2x6mm... Could anybody offer any insight? Thanks Chris 
|
|
#3
11-08-2012
|
||||
|
||||
|
From what I understand your correct (the kit manual is wrong) so yeh 6 x 1.2mm front 6 x 1.3mm rear, strangely i'm just looking into it now and from where I race it looks predominantly like the top kid's run 4 x 1.4mm front 4 x 1.5mm rear. Again as above look on the TD website, Theres setup info etc on there.
__________________
----Cougar 2 team----Cougar 2 works----Cougar 2000---- ----Schumacher Bosscat---- ----Traxxas TRX1----Losi XXX CR----Losi XXX BK2---- ----AE B4 ft----Xfactory X6^----DEX210 V1---- ----TLR22 3.0----TLR22 4.0----TLR22t 4.0----TLR22 5.0AC---- ----AE B6.4----
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Team Durango
Linear Mode
