VINTAGE PARTS! Losi xx xxx

[Apex-Dean]

Just clearing out, found tones of spares for the Losi cars xx xxx parts, need to shift them very very cheap any info please pm me.

All parts NIP

[Apex-Dean]

PROD TITLE QTY

IRS187 LOSI PIN CUSHIONS 5
LOSA1106BK KINWALD EDITION FRONT SHOCK TOWER 1
LOSA1121XX XX FRONT SPINDLES AND CARRIERS 25 DEG 5
LOSA1125 XXT FRONT SPINDLES AND CARRIERS ( XXT ) 2
LOSA1143XX XX INNER FRONT PINS 1
LOSA1207SW FRONT SHOCK TOWER ( SEDAN ) 2
LOSA2107 CR REAR PIVOT PLATE 2
LOSA2128 RR HUB CARRIERS : ALL XXX/4/T 2
LOSA2130XX REAR SUSPENSION ARMS 1
LOSA2162CR REAR INNER JINGE PINS FOR ( CR ) 3
LOSA2220SW REAR ARMS ( SEDAN ) 1
LOSA3013 MOLDED UNIVERSAL SET 3
LOSA3019 WHITE SUPER SLIDER DRIVE SHAFTS 2
LOSA3059 XXT TRANS CASE SET 2.61:1 2
LOSA3094 XX XXT SLIDER CONVERSION KIT WITH DIFF 1
LOSA3096 UNIVERSAL PIVOTS FOR MOLDED OUTDRIVES 3
LOSA3119 HYDRA - DRIVE HOUSING SET 2
LOSA3121 HYDRA - DRIVE / FRICTION SLIPPER BACKING PLATE 6
LOSA3122 HYDRA - DRIVE / FRICTION SLIPPER GEAR PLATE 3
LOSA3203SW REAR DRIVE BELT 336MM ( SEDAN ) 1
LOSA3222 4WD SLIPPERBACKING PLATE FRONT XX4 1
LOSA3225 4WD LAY SHAFT WITH HARDWARE XX4 1
LOSA3233SW FRONT DOGBONE / DRIVESHAFT WITH UNIVERSAL PIVOT ( SEDAN ) 3
LOSA3242 4WD SLIPPER BELLEVILLE SPRING WASHER SET XX4 2
LOSA3251SW REAR DOGBONE / DRIVESHAFT ( SEDAN ) 1
LOSA3255SW SHORTREAR AXLE WITH HARDWARE ( SEDAN ) 4
LOSA3906 86T HYDRA DRIVE / SLIPPER GEAR 6
LOSA3910 48DP SPUR GEAR 90T HYDRA DRIVE / SLIPPER GEAR 1
LOSA3927 48 DP SPUR GEAR 90T 2
LOSA3928 48DP SPUR GEAR 88T: A3111 3
LOSA3936SW 48DP SPUR GEAR 84T ( NON SLIPPER ) 2
LOSA3987 48DP SPUR GEAR 86T : XXX/T 1
LOSA4141 FRONT SWAY BAR SET FOR XXCR AND XXTCR 7
LOSA4211SW CHASSIS COVER SET ( SEDAN ) 2
LOSA4228SW FRONT - REAR BODY MOUNT SET ( SEDAN ) 2
LOSA5033 .9" SHOCK SET HARD COATED WITH HARDWARE 1
LOSA5057 THREADED SHOCK NUTS ( 4 ) 1

[Apex-Dean]

LOSA5118 1.15" SPRING, 8.6 RATE ORANGE 3
LOSA6034 ADJUSTABLE THREADED ROD ENDS 1
LOSA6042 4WD STEERING ROD AND BALL CUPS 3.25" XX4 3
LOSA6101 E-CLIPS .1875" ( LARGE ) 1
LOSA6200 4-40 X 1/8" SHOULDER SCREW 11
LOSA6203 4-40 X 3/8" CAP HEAD SCREW 5
LOSA6208 8-32 X 3/8" ALUMINIUM FLAT HEAD SCREW 11
LOSA6209 8-32 X 1/2" FLAT HEAD 7
LOSA6214 2-56 SHOULDER SCREW 3
LOSA6218 8-32 X 1/2 " STEEL CHASSIS SCREWS 1
LOSA6224 4-40 X 1/8 NYLON SCREWS AND WASHERS 1
LOSA6232 2-56 X 1/4 CAP HEAD SCREWS 4
LOSA6403 .078 X 5/16 PINS SLIPPER SHAFTS 10
LOSA6754 6 DEG GRAPHITE SPINDLE SET: XXX-S 2
LOSA6901 1/4" X 3/8" BALL BEARING ( NOT FOR XX4 ) 2
LOSA6905 3/16" X 5/16" BALL BEARING ( SLIPPER ) 1
LOSA6950 1/16" CARBIDE BALLS HARD BALLS` 7
LOSA7297 FR 4WD FOAM LINERS - FIRM 1
LOSA7398 R BUGGY LINER - FIRM 1
LOSA9701XX XX GRAPHITE COMPOSITE FRONT ARMS 3
LOSA9708 XXT KINGPIN / BALL SET 5
LOSA9738SW GRAPHITE / COMPOSITE FRONT SUSPENSION ARMS 2
LOSA9743SW GRAPHITE / COMPOSITE FRONT SHOCK TOWER 1
LOSA9752 2 DEG FR SPINDLE AND CARRIERS XXX-S ( GRAPHITE ) 1
LOSA9805XX XX 2.5 DEG REAR HUB SET 1
LOSA9806 1 DEG CR REAR HUB SET 1
LOSA9830CR GRAPHITE / COMPOSITE REAR PIVOT PLATE FOR ( CR ) 1
LOSA9843SW GRAPHITE / COMPOSITE REAR SHOCK TOWER 1
LOSA9855 1/2 DEG GRAPHITE OFFSET HUBS: XXXS 1
LOSA9916 GRAPHITE / COMPOSITE CHASSIS COVER SET ( SEDAN ) 1
LOSA9927SW ALUMINIUM REAR DOGBONE DRIVESHAFT WITH YOKE 5
LOSA9934 4WD ALUMINIUM LAYSHAFT WITH HARDWARE 1
LOSA9950 ALUMINIUM THRUST BEARING SPACER 3
LOSA9980BL TRIPLE X LIGHTENED MOTOR PLATE BLUE ANOSIZED 2
MIP1050 FRONT SHAFT .6 / CAR ( 1 ) 1
MIP1123 THRUST WASHER REBUILD KIT FOR LOSI CARS/TRUCKS 3
MIP1436 CVD AXLES LOSI XXX-S ( FT/RR ) 1
MIP1460 REAR SHAFT 1.0 FOR XXX 1
RPM73235 GEAR COVER FOR LOSI XXX AND XXX-T NEON BLUE 2
RPM8032 GEAR COVER FOR B2 ( HYDRA ) 3


Did'nt think i would get this done today but here it is,

Thanks for the pm's recieved already keep them coming

Regards Dean

[kayce]

Why are you not being considerate of others and not clogging up the regular threads, and violating forum policies, by not posting just in the For Sale section of the forum? http://www.oople.com/forums/forumdisplay.php?f=6

[Apex-Dean]

Well to be honest i was trying to get to as many people as possible and from the amount of messages i have recieved it seems to have worked from this thread alone.

Just trying to help some people out with old cars, thought this would be a good place to put it being vintage!

thanks for your concern

Dean

[teapot30]

Hi.... the motor cover arrived today... thank you, Best transaction I have ever done... paid on Friday, delivered on Saturday... Excellent Thank you

[quinnman226]

Hi, do you still have this?
LOSA3059 XXT TRANS CASE SET 2.61:1 2
I'm looking for that particular tranny case for my losi xxt rebuild, I've searched all over and can't seem to locate the part

[tomopazo]

Hi,

Do you still have the LOSA2107 CR REAR PIVOT PLATE? I need one.

[tomopazo]

...could also use the LOSA9830CR GRAPHITE / COMPOSITE REAR PIVOT PLATE FOR ( CR ).

Thanks!
Tom.