|
#1
|
||||
|
||||
![]()
After a good few requests, I’ve decided to release the LiPo Hold-In System I designed for my TLR22, so that everyone can enjoy the ease that I have come to relish.
As I said, I designed this ‘System’ after I found the Velcro Straps just horrible and ungainly to work with after my first time out with the 22. I originally produced it out of Steel, as it was easier to work with for a 1off. I did however manufacture the Brass Thumbscrews and Carbon Strap as you’ve just got to have some Sexy bling ![]() After testing and racing with it, I have decided to leave it as is for now. The whole system weighs 58g and puts that weight right in the middle of the Buggy. A very quick way of getting those extra grams without too much effort. I might produce it in Ali at a later date, but for now, the Pro’s for producing it out of Steel outweigh those of Ali. I will be able to offer 8off LiPo Hold-In Systems to start with. These will have to be on a first come basis and those that have contacted me previously will be alerted that I have now produced it. If the demand is there, I will of course produce more. This is when I will have to re-price the system as for the first 8off, I have managed to obtain the Thumbscrews very cheaply. It will of course come with screws to hold it to the Chassis and a Felt piece for under the Rear, so you can adjust the tightness of the hold. The price for the Full System, Delivered will be £25 I may offer ‘Half a System’ i.e. Just the front bit, for those that have mounted the Speedo on the mounting above the motor, as the Rear part may not fit. This though would still be in the region of £20 though, as it’s the Front section that has the ‘Sexy’ bits. Please post on here or PM me if you want 1 of the first 8off LiPo Hold-In Systems produced. Thanks Russ. ![]() ![]() ![]() ![]() It will arrive as in the last Pic, with no stickers attached, that way, you can add whatever you like, or non at all. The option is there for you to decide. ![]() |
#2
|
||||
|
||||
![]()
OK, after securing some good news last night to do with the Brass Thumbscrews, if anyone wants just the Front Section, i can do that on it's own, no problem.
Posted to your door - £15 Sorry, have no pic of just the Front Section, but sure you can see it will consist of; 2 Posts, 1 Carbon Strap, 2 Brass Thumbscrews and 2 C/S Screws to hold it all to the Chassis. Thanks Russ. P.S. Anything that Sells on oOple will result in a Donation to Jimmy and the World of oOple ![]() |
#3
|
||||
|
||||
![]()
Hi Russ
does this work with a rear motor 22 with a full length lipo?? cheers Jay |
#4
|
||||
|
||||
![]()
Sorry dude, will look for you today.
![]() |
#5
|
||||
|
||||
![]()
Riiiiiight....
Yes and No. Yes it will, but you'll only have to buy the Front Half of the System. Win, Win. ![]() |
#6
|
||||
|
||||
![]()
Hi Russ,
would you probably send 2 of your LiPo Hold-In Systems also all the way to Austria? Im thinking about to get a 22... Cheers, Ron |
#7
|
||||
|
||||
![]()
Yes mate, not a problem. Racing at oOple this weekend. I'll try and sort you a price out for postage tomorrow
|
#8
|
||||
|
||||
![]()
Thanks a lot!
It's not in a hurry, but i'd like to know, before i consider to get a 22. Cheers, Ron |
![]() |
Thread Tools | |
Display Modes | |
|
|