SOLD Nearly EVERY CONCEIVABLE hop up on a Losi 22 with massive spares

[martgifford]

Losi 22 - Original TLR 22 not a RTR, Original Instructions included Sold

Fitted on the Front =

• Losi Brass front kickup shim
• Atomic Carbon Front shock tower - super glued sides - minimal if any damage - 5/6 mm thick
• Losi Aluminum Servo Horn (23) - fits Savox low profile
• Losi Aluminum Servo bulkhead/mount
• Losi Front King Pin Titanium Nitride, Threaded
• Losi Aluminum Steering Rack

Fitted on the Rear =

• Losi Rear Outer Threaded Hinge Pin
• Losi Aluminum HRC 4 Degree Toe Plate
• Losi Mid Motor Camber Block - (plastic part lets the car down)
• Losi Titanium Ball Studs on the rear to limit any breakages
• Losi Aluminium Rear Hex Adaptor - .75 width - (keeps the rear end in check)
• Cream Rear weight
• Losi Ball Diff fitted

Fitted throughout the car:

• Brand new stainless screw set just gone in - never seen the track - no rust
• Losi Titanium Shock Standoffs - front and rear
• Lunsford Punisher Titanium Turnbuckles
• Atomic Carbon Blue Shims and Nuts - fitted throughout rather then the plastic ones
• Nick Gurnell Tapered pisons fitted in the big bores
• Cut bladders inside the shocks to provide 0 rebound (include a BNIP set of bladders if you like rebound)
• Low-friction O-Rings

Springs:

• Blue Front Springs Fitted
• Yellow Rear Springs Fitted
• White Rear Springs
• Pink Rear Springs
• Red Front Springs
• Black Front Springs
• Green Front springs

Custom Shell in good condition and looks pretty neat with yellow wheels and aerial, wings is knackered but fine for practice - will include a new wing in packet.



All parts included to convert back to rear motor

Spares

• 2 spur gears
• TLR5089 - Bladder - BNIP
• Pair of Front Wishbones
• Pair of Rear Wishbones
• 3x Rear Hubs
• 3x Front Steering Arms
• 4x Caster Blocks
• Front Bulkhead
• Mid-motor Brace
• Battery tray x2
• Rear hingepins x 3 (1 threaded with two nuts - 2 standard)
• Servo Mount / Bulkhead
• Plastic kickup shims
• 2 x Front Shock Shafts (TiNitrade)
• Losi 22 Rear Weight
• Losi Plastic Bleader Shock Caps
• Shock O-Rings
• Plastic Ball Cups
• All the Losi Shock Pistons
• Anti-Squat Set for LRC and HRC
• 4 degreee LRC rear plate
• Servo mounts and shims
• New Wing BNIP
• Plastic Drive Hexes

Car has been modded with the mid-motor brace removed (it is included if you want to re-fit it), one of the side pods have been dremeled to allow for wires to rung through them (make the electronics install easier), and also a hole countersunk in the chassis to provide a battery stop (the original battery stop is included) the rear hubs have been dremeled to allow the suspension to have fall movement without the ball studs popping off.


Will include new front Yellow Staggers and Worn BB White (similar to Yellow) on the rear - But will include 5 rear sets of wheels and 5 front sets of wheels - not in picture - will also chuck in some brand new yellows if you pay the asking price so new yellows throughout

Will include any other parts that I may not have mentioned. The gearbox is now super-smooth. Electronics not included
















SOLD posted recorded ono as it literally includes so many hop ups,