|
#1
|
|||
|
|||
![]()
Hi hope someone can help. Just fitted a savox 1251 mini sever in my loss 22, I have shimmed it with a 2 and 1 in each side but it catches slightly and seems to give excellent steering lock on 1 side and limited on the other.
I note there is a dice about trying different ball and sockets, any help would be useful please. thanks |
#2
|
||||
|
||||
![]()
This was posted not to long ago on the TLRacing blog. http://www.petitrc.com/setup/losi/se...ups/index.html
The spektrom servo has the same problem as the savox.
__________________
Jon Gagnon TLR 22 |
#3
|
||||
|
||||
![]()
Dremmel the upper bulkhead to clear.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#4
|
|||
|
|||
![]() Quote:
Second, either use captured ends (juane noted above, LOSA6017) instead of ballcups - or identify exactly where it might be "catching" on the front bulkhead, and use a hobbyknife or dremel and remove the small bit of material to gain needed clearance. I did it to both of my cars, and it clears easily with a little modding. |
#5
|
|||
|
|||
![]()
dremmel did its job thanks to the lads at MB Models
|
#6
|
||||
|
||||
![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
XB4 & MORE , Team Xray, Team Gainsy Graphics, DPP Racing 2013 & 2014 OOPLE INVERNATIONAL BEER RACE RUNNER UP! FEEDBACK LINK =
|
#7
|
|||
|
|||
![]()
return the 1251 and get a full bodied savox. I toasted the gears on my 1251 after only a few races... Installed the Savox SC-1258TG Standard Digital "High Speed" Titanium Gear Servo and have never looked back
![]() |
#8
|
||||
|
||||
![]() Quote:
not broken a gear yet, 8 months use every week.... there solid. hear a few people doing the 1251 gears in..... ![]()
__________________
XB4 & MORE , Team Xray, Team Gainsy Graphics, DPP Racing 2013 & 2014 OOPLE INVERNATIONAL BEER RACE RUNNER UP! FEEDBACK LINK =
|
![]() |
Thread Tools | |
Display Modes | |
|
|